HP ThinPro 6.2 - Administrator Guide

Registry key Description
resolve properly to myserver.mydomain.com, even if the
DNS server does not have myserver in its name resolution
tables. Up to
ve additional search domains can be specied.
root/Network/VPN/AutoStart
If set to 1, VPN starts automatically when the system starts up.
root/Network/VPN/PPTP/Domain
Sets the PPTP domain.
root/Network/VPN/PPTP/Gateway
Sets the PPTP gateway.
root/Network/VPN/PPTP/Password
Sets the PPTP user password.
root/Network/VPN/PPTP/Username
Sets the PPTP username.
root/Network/VPN/Type
Sets the VPN type.
root/Network/VPN/VPNC/DPDEndianess
Sets the endianness of the DPD sequence number (see rfc3706).
0: big endian; 1: little endian. Try toggling this if the session
aborts intermittently for no apparent reason.
root/Network/VPN/VPNC/DPDInterval
Sets the DPD interval (see rfc3706) in seconds.
root/Network/VPN/VPNC/DebugLevel
Sets the debug level to either 0, 1, 2, 3, or 99. This generates a lot
of logs. Enable this only when you need to troubleshoot a VPN
issue.
root/Network/VPN/VPNC/Domain
Sets the VPNC domain.
root/Network/VPN/VPNC/Gateway
Sets the VPNC gateway.
root/Network/VPN/VPNC/Group
Sets the VPNC group.
root/Network/VPN/VPNC/GroupPassword
Sets the VPNC group password.
root/Network/VPN/VPNC/IKEDHGroup
Sets the VPNC IKE Diie-Hellman group.
root/Network/VPN/VPNC/LocalUDPPort
Sets the local UDP port to use for VPNC. If set to 0, a random port
will be used. This setting is valid only when the NAT traversal
mode (NATTMode) is cisco-udp.
root/Network/VPN/VPNC/NATTMode
Sets the VPNC NAT traversal mode.
root/Network/VPN/VPNC/Password
Sets the VPNC user password.
root/Network/VPN/VPNC/PerfectForwardSecrecy
Sets the VPNC Diie-Hellman group to use for Perfect Forward
Secrecy (PFS).
root/Network/VPN/VPNC/Security
Sets the VPNC security level.
root/Network/VPN/VPNC/Username
Sets the VPNC username.
root/Network/Wired/DefaultGateway
Sets the default gateway the device will use to communicate with
the Internet. Typically this is the IP address of the router. This
setting will only take eect when Method is set to Static.
root/Network/Wired/EnableDefGatewayAsDNS
If set to 1, the default gateway will also be the name server.
root/Network/Wired/EthernetSpeed
Sets the link speed of the primary Ethernet network interface.
Automatic allows the fastest available link speed to be used,
which is usually 1 Gbps or 100 Mbps/Full depending on the switch.
The link speed can also be forced to a single speed (100 Mbps or
10 Mbps) and duplex mode (Full or Half) to support switches and
hubs that do not perform appropriate auto-negotiation.
root/Network/Wired/IPAddress
Sets the IPv4 address of the thin client. This setting will only take
eect when Method is set to Static.
134 Appendix D Registry keys