HP ThinPro 6.2 - Administrator Guide

Registry key Description
HP does not recommend using Static in a generic client prole,
because all clients would use the same IP address.
root/Network/Wired/Profiles/<UUID>/IPv6/
SubnetMask
Sets the subnet mask of the device, which is usually the IPv6
prex length. This setting takes eect only if Method is set to
Static.
root/Network/Wired/Profiles/<UUID>/MTU
Sets the MTU. It does not matter if the IP address is static or
acquired by DHCP.
root/Network/Wired/Profiles/<UUID>/Priority
Reserved for wired network.
root/Network/Wired/Profiles/<UUID>/Security/
EAPPEAP/AnonyIdentity
Sets the anonymous identity for PEAP authentication.
root/Network/Wired/Profiles/<UUID>/EAPPEAP/
CACert
Sets the path to the CA certicate le for PEAP authentication.
root/Network/Wired/Profiles/<UUID>/Security/
EAPPEAP/InnerAuth
Sets the PEAP inner authentication protocol.
root/Network/Wired/Profiles/<UUID>/Security/
EAPPEAP/PEAPVer
Sets the PEAP version.
root/Network/Wired/Profiles/<UUID>/Security/
EAPPEAP/Password
Sets the password for PEAP authentication.
root/Network/Wired/Profiles/<UUID>/Security/
EAPPEAP/Username
Sets the username for PEAP authentication.
root/Network/Wired/Profiles/<UUID>/Security/
EAPTLS/CACert
Sets the path to the CA certicate le for TLS authentication.
root/Network/Wired/Profiles/<UUID>/Security/
EAPTLS/Identity
Sets the identity for TLS authentication.
root/Network/Wired/Profiles/<UUID>/EAPTLS/
PrivateKey
Sets the path to a private key le for TLS authentication.
root/Network/Wired/Profiles/<UUID>/Security/
EAPTLS/PrivateKeyPassword
Sets the password to a private key le for TLS authentication.
root/Network/Wired/Profiles/<UUID>/EAPTLS/
UserCert
Sets the path to a user certicate le for TLS authentication.
root/Network/Wired/Profiles/<UUID>/Security/
EAPTTLS/AnonyIdentity
Sets the anonymous identity for TTLS authentication.
root/Network/Wired/Profiles/<UUID>/Security/
EAPTTLS/CACert
Sets the path to a CA certicate le for TTLS authentication.
root/Network/Wired/Profiles/<UUID>/Security/
EAPTTLS/InnerAuth
Sets the TTLS inner authentication protocol.
root/Network/Wired/Profiles/<UUID>/Security/
EAPTTLS/Password
Sets the password for TTLS authentication.
root/Network/Wired/Profiles/<UUID>/Security/
EAPTTLS/Username
Sets the username for TTLS authentication.
root/Network/Wired/Profiles/<UUID>/Security/
Type
Sets the wired authentication type.
root/Network/Wired/Profiles/<UUID>/
WiredInterface
Sets the wired interface for the prole.
136 Appendix D Registry keys