HP ThinPro 6.2 - Administrator Guide

Registry key Description
root/Network/Wireless/PowerEnable
If set to 1, power management of the wireless network card is
enabled.
root/Network/Wireless/Profiles/<UUID>/
AutoConnect
If set to 1, automatic connection to the SSID is enabled.
root/Network/Wireless/Profiles/<UUID>/IPv4/
Address
Sets the IPv4 address of the client. This setting takes eect only if
Method is set to Static.
root/Network/Wireless/Profiles/<UUID>/IPv4/
DefaultGateway
Sets the default gateway the device uses to communicate with
the Internet. Typically, this Is the IP address of the router. This
setting takes eect only if Method is set to Static.
root/Network/Wireless/Profiles/<UUID>/IPv4/
Enabled
If set to 1, IPv4 is enabled for this prole.
root/Network/Wireless/Profiles/<UUID>/IPv4/
Method
If set to Automatic, the client uses DHCP to retrieve network
settings. If set to Static, the values of the Address,
SubnetMask, and DefaultGateway registry keys are used.
HP does not recommend using Static in a generic client prole,
because all clients using that prole would use the same IP
address.
root/Network/Wireless/Profiles/<UUID>/IPv4/
SubnetMask
Sets the subnet mask of the device, such as 255.255.255.0 (for a
standard class C subnet). This setting takes eect only if Method
is set to Static.
root/Network/Wireless/Profiles/<UUID>/IPv6/
Address
Sets the IPv6 address of the client. This setting takes eect only if
Method is set to Static.
root/Network/Wireless/Profiles/<UUID>/IPv6/
DefaultGateway
Sets the default gateway the device uses to communicate with
the Internet. Typically, this Is the IP address of the router. This
setting takes eect only if Method is set to Static.
root/Network/Wireless/Profiles/<UUID>/IPv6/
Enabled
If set to 1, IPv6 is enabled for this prole.
root/Network/Wireless/Profiles/<UUID>/IPv6/
Method
If set to Automatic, the client uses DHCP to attempt to retrieve
network settings. If set to Static, the values of the Address,
SubnetMask, and DefaultGateway registry keys are used.
HP does not recommend using Static in a generic client prole,
because all clients would use the same IP address.
root/Network/Wireless/Profiles/<UUID>/IPv6/
SubnetMask
Sets the subnet mask of the device, which is usually the IPv6
prex length. This setting takes eect only if Method is set to
Static.
root/Network/Wireless/Profiles/<UUID>/
PowerEnable
If set to 1, power management of the wireless network card is
enabled.
root/Network/Wireless/Profiles/<UUID>/
Priority
Denes the priority of the network. For a wireless network, a
larger number means a higher priority. High priority is preferred
for a wireless network connection.
root/Network/Wireless/Profiles/<UUID>/SSID
Sets the wireless access point to use via SSID.
root/Network/Wireless/Profiles/<UUID>/
SSIDHidden
Species whether the SSID of the wireless access point is hidden.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPFAST/AnonyIdentity
Sets the anonymous identity for EAP-FAST authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPFAST/FastProvision
Sets the provisioning option for EAP-FAST authentication.
138 Appendix D Registry keys