HP ThinPro 6.2 - Administrator Guide

Registry key Description
root/Network/Wireless/Profiles/<UUID>/
Security/WEP/Key
Sets the WEP password.
root/Network/Wireless/Profiles/<UUID>/
Security/WEP/KeyIndex
Sets the WEP password index.
root/Network/Wireless/Profiles/<UUID>/
Security/WirelessBand
Species the frequency range selection. Select Auto to scan all
wireless channels; select 2.4GHz to scan only 2.4 GHz channels;
select
5GHz to scan only 5 GHz channels.
root/Network/Wireless/Profiles/<UUID>/
Security/WirelessInterface
Sets the wireless interface for the prole.
root/Network/Wireless/Roaming/
enableRoamingOptions
If set to 1, wireless roaming options are congurable.
root/Network/Wireless/Roaming/
roamingThreshold
Sets the minimum signal strength, in dBm, allowed before
attempting to roam to a stronger access point. Note that this
value is negative.
root/Network/Wireless/Roaming/scanInterval
Sets how often, in seconds, to scan for a stronger access point
when the signal strength is below the roaming threshold.
root/Network/Wireless/SSID
Sets the wireless access point to use via its SSID.
root/Network/Wireless/SSIDHidden
Species if the SSID of the wireless access point is hidden.
root/Network/Wireless/SSIDWhiteList
Species a whitelist for wireless access points. If this registry
key's value is not empty, only the SSIDs specied in the value will
be shown in the wireless access point scan results. Use a
semicolon to separate the SSIDs.
root/Network/Wireless/Security/CACert
Sets the path to CA certicate le.
root/Network/Wireless/Security/EAPFASTPAC
Sets the path to the PAC le for EAP-FAST authentication.
root/Network/Wireless/Security/
EAPFASTProvision
Sets the provisioning option for EAP-FAST authentication.
root/Network/Wireless/Security/Identity
Sets the identity or anonymous identity.
root/Network/Wireless/Security/InnerAuth
Sets the PEAP inner authentication protocol.
root/Network/Wireless/Security/InnerAuthTTLS
Sets the TTLS inner authentication protocol.
root/Network/Wireless/Security/PEAPVersion
Sets the PEAP version.
root/Network/Wireless/Security/Password
Sets the password.
root/Network/Wireless/Security/PrivateKey
Sets the path to a private key le. This is only used for TLS
authentication.
root/Network/Wireless/Security/Type
Sets the wireless authentication type.
root/Network/Wireless/Security/UserCert
Sets the path to a user certicate le. This is only used for TLS
authentication.
root/Network/Wireless/Security/Username
Sets the username.
root/Network/Wireless/Security/WEPAuth
Sets the WEP authentication type.
root/Network/Wireless/Security/WEPIndex
Sets the WEP password index.
root/Network/Wireless/SubnetMask
Sets the subnet mask of the device, such as 255.255.255.0 (for a
standard class C subnet). This setting will only take eect when
Method is set to Static.
140 Appendix D Registry keys