HP ThinPro 6.2 - Administrator Guide

Registry key Description
root/Network/Wireless/UseWirelessProfiles
If set to 1, the wireless connection is congured in prole mode,
which can connect to multiple wireless networks. This is useful for
mobile computing. If set to 0, only one congured wireless
network can be connected.
root/Network/Wireless/WirelessBand
Species the frequency range selection. Select Auto to scan all
wireless channels; select 2.4GHz to scan only 2.4 GHz channels;
select
5GHz to scan only 5 GHz channels.
root/Network/Wireless/WpaDriver
Species the driver used by wpa_supplicant (wext by default).
nl80211 is the only other driver that is currently supported.
root/Network/Wireless/bcmwlCountryOverride
Overrides the country value from the BIOS in case the BIOS does
not have the necessary value. The bcmwl driver accepts the
wl_country option, which is retrieved from BIOS values on an as-
needed basis (only Indonesia is supported currently). A system
restart is required for any changes to take eect.
root/Network/Wireless/
disableUserCreateWirelessProfile
If set to 1, user accounts cannot create wireless proles from the
wireless system tray.
root/Network/Wireless/
disableUserWirelessProfileTrayMenu
If set to 1, the wireless menu of the wireless system tray icon is
disabled for the user account.
root/Network/Wireless/
disableWirelessProfileTrayMenu
If set to 1, the wireless menu of the wireless system tray icon is
disabled.
root/Network/Wireless/
tryAutoWirelessIfUserFailed
If set to 1, if a user tries to connect to a wireless AP and fails, the
wireless module tries to connect wirelessly using all available
proles. If set to 0, if a user tries to connect to a wireless AP and
fails, the wireless status is set to disconnected. This is a fallback
function.
root/Network/disableLeftClickMenu
If set to 1, the left-click menu for the network system tray icon is
disabled.
root/Network/disableRightClickMenu
If set to 1, the right-click menu for the network system tray icon is
disabled.
root/Network/enableVPNMenu
If set to 1, the left-click VPN menu accessible from the network
taskbar icon is enabled.
root/Network/iPeak/ShowStatus
If set to 1, the HP Velocity status is displayed as part of the
system tray icon. HP Velocity is not supported on the HP t420.
root/Network/iPeak/SingleSidedAccelerate
If set to 1, the single-sided acceleration feature of HP Velocity is
enabled. If set to 0, this feature is disabled. HP Velocity is not
supported on the HP t420 or HP mt20.
root/Network/iPeak/Status
If set to 1, HP Velocity is enabled. If set to 2, HP Velocity is
enabled in Monitor mode. If set to 0, HP Velocity is disabled. HP
Velocity is not supported on the HP t420.
root/Network/userLock
If set to 1, and if the network settings have been modied by the
user, the network settings are preserved when importing a client
prole.
root/Network/userLockEngaged
This registry key is set to 1 automatically after the network
settings have been modied by the user. You normally do not
need to modify this setting.
Network 141