HP ThinPro 6.2 - Administrator Guide

Registry key Description
root/SystemInfo/Pages/SystemLogs
If set to 0, the System Logs tab of the System Information
window is hidden from end users.
root/SystemInfo/authorized
If set to 0, the System Information button on the taskbar is
disabled for end users.
TaskMgr
Registry key Description
root/TaskMgr/General/AlwaysOnTop
If set to 1, the Task Manager window is always on top.
USB
Registry key Description
root/USB/Classes/<class type>/ClassID
Sets the USB class ID number.
root/USB/Classes/<class type>/DisplayName
Sets the USB class name.
root/USB/Classes/<class type>/State
Sets whether the class is mapped to the remote host.
root/USB/Classes/<class type>/Visible
Sets whether the class is shown in the UI, not shown in the UI, or
disabled.
root/USB/Devices/<UUID>/DisplayName
Sets the name to show in USB Manager. If not supplied, USB
Manager will attempt to generate an appropriate name using
device information.
root/USB/Devices/<UUID>/ProductID
Sets the product ID of the device.
root/USB/Devices/<UUID>/State
Sets whether this device is mapped to the remote host as follows:
0 = Do Not Redirect; 1 = Use Defaults; 2 = Redirect.
root/USB/Devices/<UUID>/VendorID
Sets the vendor ID of the device.
root/USB/root/autoSwitchProtocol
If set to 1, the remote USB protocol will switch automatically
based on which protocol is chosen.
root/USB/root/mass-storage/allowed
If set to 1, mass storage devices will be mounted automatically
when the protocol is local.
root/USB/root/mass-storage/read-only
If set to 1, when mass storage devices are mounted automatically,
they will be mounted as read-only.
root/USB/root/protocol
Sets which protocol owns remote USB. Valid values depend on
which protocols are installed on the system but can include
local, xen, freerdp, and view.
root/USB/root/showClasses
If set to 1, the Classes section is shown in the USB Manager.
146 Appendix D Registry keys