HP ThinPro 6.2 - Administrator Guide

auto-update
Registry key Description
root/auto-update/DNSAliasDir
Sets the default root directory for DNS alias mode on the server
hosting HP Smart Client Services.
root/auto-update/LockScreenTimeout
Species the timeout (in minutes) after which the screen will
unlock during an automatic update. If set to 0, the screen will be
unlocked throughout the entire automatic update until the update
is complete.
root/auto-update/ManualUpdate
If set to 1, the DHCP tag, DNS alias, and broadcast update
methods for Automatic Update are disabled. When performing a
manual update, the password, path, protocol, user, and
ServerURL registry keys must be set to ensure the update
server is known.
root/auto-update/ScheduledScan/Enabled
If set to 1, the thin client performs periodic scans of the
Automatic Update server to check for updates. If set to 0, the thin
client will only check for updates at system startup.
root/auto-update/ScheduledScan/Interval
Sets the amount of time to wait between scheduled update scans.
This should be specied in the HH:MM format. Intervals longer
than 24 hours can be specied. For example, to have the scans
occur every 48 hours, set this to 48:00.
root/auto-update/ScheduledScan/Period
Thin clients will randomly activate their scheduled scan
throughout the dened period. Using a long period avoids cases
where all thin clients update at exactly the same, which could
cause network congestion. The period should be specied in the
HH:MM format. For example, to spread thin client updates over a
2.5-hour period, set this to 02:30.
root/auto-update/ScheduledScan/StartTime
Sets the start time of the rst scheduled update scan period in the
format HH:MM, using the 24-hour time format. For example, 4:35
p.m. would be 16:35.
root/auto-update/ServerURL
Sets the IP address or domain name of the update server used
when ManualUpdate is enabled.
root/auto-update/VisibleInSystray
If set to 1, the Automatic Update system tray icon is enabled.
root/auto-update/enableLockScreen
If set to 1, the screen locks while an automatic update is in
progress.
root/auto-update/enableOnBootup
If set to 1, Automatic Update is enabled at system startup.
root/auto-update/enableSystrayLeftClickMenu
If set to 1, the left-click menu for the Automatic Update system
tray icon is enabled.
root/auto-update/enableSystrayRightClickMenu
If set to 1, the right-click menu for the Automatic Update system
tray icon is enabled.
root/auto-update/gui/auto-update/ManualUpdate
Controls the state of the Enable manual conguration widget in
the Automatic Update tool. If set to active, the widget is visible
in the UI and the user can interact with it. If set to inactive, the
widget is hidden. If set to read-only, the widget is visible in the
read-only state.
root/auto-update/gui/auto-update/ServerURL
Controls the state of the Server widget in the Automatic Update
tool. If set to active, the widget is visible in the UI and the user
can interact with it. If set to inactive, the widget is hidden. If
set to read-only, the widget is visible in the read-only state.
auto-update 147