HP ThinPro 6.2 - Administrator Guide

Registry key Description
root/users/user/ssoconnectiontype
This registry key is either used internally or reserved for future
use. The value should not be changed.
root/users/user/switchAdmin
If set to 1, switching to administrator mode is enabled.
root/users/user/xhosts/<UUID>/xhost
Species the IP address or hostname of a system that will be
allowed to remotely control the thin client when XHostCheck is
enabled.
vncserver
Registry key Description
root/vncserver/coreSettings/enableVncShadow
If set to 1, the VNC shadowing server for the thin client is enabled.
root/vncserver/coreSettings/
userNotificationMessage
Sets the notication message that is shown to the user when
someone is attempting to connect to the thin client using VNC.
root/vncserver/coreSettings/
vncAllowLoopbackOnly
If set to 1, only a localhost or loopback address is allowed for VNC
connections.
root/vncserver/coreSettings/
vncDefaultNumLockStatus
If set to 1, Num Lock is on by default. If set to 0, Num Lock is o by
default.
root/vncserver/coreSettings/
vncNotifyShowTimeout
If set to 1, a timeout is applied to the notication dialog that is
shown to the user when someone is attempting to connect to the
thin client using VNC.
root/vncserver/coreSettings/vncNotifyTimeout
Sets the timeout in seconds for the notication dialog that is
shown to the user when someone is attempting to connect to the
thin client using VNC.
root/vncserver/coreSettings/vncNotifyUser
If set to 1, a notication is shown to the user when someone is
attempting to connect to the thin client using VNC.
root/vncserver/coreSettings/vncPassword
Sets the password for VNC shadowing. The key
vncUsePassword must also be enabled.
root/vncserver/coreSettings/vncReadOnly
If set to 1, VNC shadowing will operate in view-only mode.
root/vncserver/coreSettings/
vncRefuseInDefault
If set to 1, VNC requests are refused automatically if the user does
not interact with the notication dialog before the timeout.
root/vncserver/coreSettings/vncStopButton
If set to 1, an always-on-top button is shown on the left corner of
the screen. Selecting that button disconnects the VNC session.
root/vncserver/coreSettings/
vncTakeEffectRightNow
If set to 1, VNC settings take eect immediately after being
modied.
root/vncserver/coreSettings/vncUsePassword
If set to 1, the password specied in vncPassword is required
for VNC shadowing.
root/vncserver/coreSettings/vncUseSSL
If set to 1, SSL is used for VNC connections.
root/vncserver/gui/VNCShadowManager/name
This registry key is either used internally or reserved for future
use. The value should not be changed.
root/vncserver/gui/VNCShadowManager/status
This registry key is either used internally or reserved for future
use. The value should not be changed.
root/vncserver/gui/VNCShadowManager/title
This registry key is either used internally or reserved for future
use. The value should not be changed.
vncserver 161