HP ThinPro 6.2 - Administrator Guide

Advanced
NOTE: See Advanced connection settings on page 7 for information about the settings available under the
Advanced category when editing a connection.
RDP
The RDP client is based on FreeRDP 1.1 and meets the following requirements for RDP:
●
Hardware-accelerated RemoteFX
●
MMR supported when connecting to Windows hosts with the Desktop Experience feature enabled
●
USBR supported when connecting to RDP servers that enable it
RDP general settings
The following table describes the RDP general settings.
NOTE: These settings aect all RDP connections.
Option Description
Send hostname as Species whether to send the thin client's hostname or MAC
address as the hostname specied to the remote system.
Enable Multimedia Redirection Enables multimedia redirection.
RDP per-connection settings
NOTE: These settings aect the connection you are currently conguring only.
Network
The following table describes the settings that are available under the Network category when editing an RDP
connection.
Option Description
Connection Name A custom name for this connection.
Server Name/Address The IP address or server name for this connection, or the RD Web Access feed URL. If
required, the port can be appended to the server after a colon (by default, the port is
3389 for a direct RDP connection).
NOTE: The RD Web Access feed URL must begin with https://. By default, this is
added automatically as specied by the rdWebFeedUrlPattern registry key, which
denes the pattern of the URL.
Credentials
●
Use Single Sign-On credentials: The credentials used at login are also used to start
the connection.
●
Ask for credentials at connection start: There are no pre-supplied credential
components.
●
Use predened user, password, and/or domain: Some or all of the credentials are
stored and supplied for the connection.
14 Chapter 4 Connection types