HP ThinPro 6.2 - Administrator Guide

Additional connection types (ThinPro only)
NOTE: By default, these connection types are not available in Smart Zero. For more information, see
Choosing an OS conguration on page 2.
TeemTalk
NOTE: These settings aect the connection you are currently conguring only.
For more information about HP TeemTalk, see the User Guide for HP TeemTalk.
Conguration
The following table describes the settings that are available under the Conguration category when editing a
TeemTalk connection.
Option Description
Name The connection name.
TeemTalk creation wizard Opens the TeemTalk Session Wizard. See the other tables in this section for more
information.
System beep Enables the system beep sound.
TeemTalk Session Wizard
The following table describes the settings that are available under the Connection Information category in the
TeemTalk Session Wizard.
Option Description
Session Name The name of the session.
Transport The network transport to use for the connection. Valid transports are: TCP/IP, Serial,
SSH2, and SSL.
Connection The connection method to be used. Advanced connection options can be congured via
the button.
Emulation Emulation types are: hp70092, IBM 3151, IBM3270 Display, IBM3270 Printer, IBM5250
Display, IBM5250 Printer, MD Prism, TA6530, VT Series, and Wyse.
The following table describes the settings that are available under the Advanced Options category in the
TeemTalk Session Wizard.
Option
Description
Emulation Printer The HP TeemTalk emulation printer settings.
Auto Logon The HP TeemTalk auto login settings.
Key Macros The HP TeemTalk key macros settings.
Mouse Actions The HP TeemTalk mouse actions settings.
Soft Buttons The HP TeemTalk soft buttons settings.
Additional connection types (ThinPro only) 31