HP ThinPro 6.2 - Administrator Guide

Option Description
Attributes The HP TeemTalk attributes settings.
Auxiliary Ports The HP TeemTalk auxiliary ports settings.
Hotspots The HP TeemTalk hotspots settings.
The following table describes the settings that are available under the Preferences category in the TeemTalk
Session Wizard.
Option Description
Start session connected Starts the session connected.
Show Status Bar Displays the status bar for this connection.
The following table describes additional settings that are available under the Preferences category in the
TeemTalk Session Wizard.
Option Description
Show Conguration Bar Displays the Conguration Bar.
Save Current Window Position Saves current window's size and position when you select Save Preferences. It will be
restored on the next system launch.
NOTE: Select Save Preferences each time you change the window size or position to
save the new values.
Run in Full Screen Mode Select to make the window full screen and remove the frame, soft buttons, menu, and
conguration bars.
NOTE: This option does not become eective until the next system launch and
overrides the Show Conguration Bar and Save Current Window Position options.
Browser Command In the box, type the command that runs your web browser, such as:
/ display html links Firefox
Command Line Start Up Options Use to specify an alternate location for the startup options.
NOTE: For specic information on HP TeemTalk Command Line Startup Options, see
the HP TeemTalk Terminal Emulator User Guide.
Advanced
NOTE: See Advanced connection settings on page 7 for information about the settings available under the
Advanced category when editing a connection.
XDMCP
NOTE: These settings aect the connection you are currently conguring only.
32 Chapter 4 Connection types