HP ThinPro 6.2 - Administrator Guide
Menu option Description
For more information, see HP ThinState on page 55.
VNC Shadow Lets you congure VNC Shadowing options.
For more information, see VNC Shadowing on page 58.
Wireless Statistics Lets you view information about wireless access points.
Component Manager
The Component Manager lets you remove system components that are not going to be used in your
environment, which might be desirable to reduce the image size. For example, if Citrix connections are never
used in your environment, you might want to remove the Citrix component.
As components are removed, the new conguration can be tested before you apply the changes permanently.
You can also undo changes that were made, if the changes have not yet been applied permanently.
IMPORTANT: After the new conguration is applied permanently, all snapshots are removed and a new
factory snapshot is created. Removed components cannot be restored after this point.
To open the Component Manager:
▲
Select Management > Component Manager in Control Panel.
Removing components
To remove components:
1. In the Component Manager, select the desired components.
TIP: To select multiple components, use Ctrl or Shift.
2. Select Remove Component(s).
3. If the conrmation dialog appears, select OK.
4. After the components are removed, test the new conguration.
Undoing a change
You can undo each change, one at a time, if the changes have not yet been applied permanently. A restart of
the thin client is required after each undo.
To undo a change made with the Component Manager:
1. In the Component Manager, select Revert Last Change.
2. Select Yes to restart the thin client.
Repeat this process for as many changes you want to undo.
IMPORTANT: If you take a snapshot of the image while testing a new conguration, you cannot undo the
changes via the Component Manager. Those changes can be undone only by restoring a previous snapshot via
the Snapshots tool. However, this does not work if the changes have already been applied permanently,
because that function deletes all existing snapshots. If changes have already been applied permanently, you
must reinstall the operating system to restore most removed components. Some components (such as Citrix,
RDP, and VMware Horizon View) might be available as add-ons on the web and can be restored by reinstalling
them.
Management 53