HP ThinPro 6.2 - Administrator Guide

NOTE: If a client kit is installed, it is displayed automatically in the Client Kits box, and additional
registry settings will be available on the Registry screen.
2. Set the conguration to either standard (ThinPro) or zero (Smart Zero).
NOTE: For older image versions, this setting is greyed out and set to zero automatically.
Conguring a default connection for a client prole
To congure a default connection for a client prole:
1. On the Connection screen in Prole Editor, choose the desired connection type from the Type drop-
down list.
NOTE: The available connection types dier depending on whether you chose ThinPro or Smart Zero
on the Platform screen.
2. In the Server eld, enter the name or IP address of the server.
Modifying the registry settings of a client prole
To change default registry settings for a client prole:
1. On the Registry screen in Prole Editor, expand the folders in the Registry settings tree to locate the
registry setting you want to change.
2. Select the registry key, and then enter the desired value in the Value eld.
NOTE: See Registry keys on page 77 for a comprehensive list and description of registry keys.
Adding les to a client prole
Use the Files screen in Prole Editor to add conguration les that will be installed on the thin client
automatically when the client prole is installed. This is typically used for the following reasons:
●
To add certicates
●
To modify device settings when a registry setting for the change is unavailable
●
To modify the behavior of the system by inserting custom scripts or modifying existing scripts
You can also specify a symbolic link that points to a le already installed on the thin client. Use this when the
le needs to be accessed from more than one directory.
Adding a conguration le to a client prole
1. On the Files screen in Prole Editor, select Add a le.
2. Select Import File, locate the le to be imported, and then select Open.
NOTE: Files can also be exported using the Export File button, if further details about the le are
required.
3. In the Path eld, enter the path where the le will be installed on the thin client.
4. In the File details section, set the Owner, Group, and Permissions elds to the appropriate values.
Client prole customization 67