HP ThinPro 7.0 - Administrator Guide

Registry key Description
of HP ThinPro. This setting should be disabled only in the case of a
defect specic to RemoteFX protocol. Disabling this setting might
also disable more advanced codecs.
root/ConnectionType/freerdp/connections/
<UUID>/requireEncryptionOracleRemediation
If set to 1, the Remote Desktop Client refuses to connect to
servers that do not oer suitable protections. This addresses
Microsoft security vulnerability CVE-2018-0886.
root/ConnectionType/freerdp/connections/
<UUID>/scCertificate
If a precongured smart card login is selected, this gives an
identier corresponding to the certicate on that smart card to be
used for authentication.
root/ConnectionType/freerdp/connections/
<UUID>/scPin
If a precongured smart card login is selected, this gives the PIN
or password for that smart card.
root/ConnectionType/freerdp/connections/
<UUID>/scRedirection
If set to 1, all local smart card readers are redirected to the
remote host but are not used for the Network Level
Authentication (NLA) of the RDP session.
NOTE: If credentialsType is set to smartcard or
smartcard is set to 1, scRedirection is ignored, depending on
the HP ThinPro version. In this
conguration, the smart card
readers are always redirected.
root/ConnectionType/freerdp/connections/
<UUID>/seamlessWindow
If set to 1, window decorations are disabled. This can be desirable
in a multi-monitor conguration to allow the connection to be set
to the size of the primary monitor.
root/ConnectionType/freerdp/connections/
<UUID>/securityLevel
Sets the certicate security level. If set to 0, all connections are
allowed. If set to 1, remembered hosts are selected and a warning
dialog is shown if verication is not passed. If set to 2,
remembered hosts are not selected and a warning dialog is shown
if verication is not passed. If set to 3, all insecure connections
are refused.
root/ConnectionType/freerdp/connections/
<UUID>/sendHostname
Sets the thin client hostname that is sent to the remote host. If
left blank, the system hostname is sent. The registry key root/
ConnectionType/freerdp/general/sendHostname
must be set to hostname for this key to be used.
root/ConnectionType/freerdp/connections/
<UUID>/showConnectionGraph
This is a diagnostic function. If set to 1, when the session starts, a
separate program will be started to graph the connection's health.
root/ConnectionType/freerdp/connections/
<UUID>/showRDPDashboard
If set to 1, when the session starts, a separate window displays
RDP performance and status.
root/ConnectionType/freerdp/connections/
<UUID>/smartcard
If set to 1, local smartcard authentication to the remote host is
allowed. Currently, this will disable Network Level Authentication
(NLA).
root/ConnectionType/freerdp/connections/
<UUID>/sound
If set to 1, the playback and recording devices are redirected to
the remote host via the Audio extension. If set to 0, the
extension is disabled. If set to 2, the USB audio devices are
redirected as congured in USB Manager. Generally, HP
recommends setting this value to 1 so that high-level audio
redirection is used. This will improve audio quality and ensure
that client audio redirected via other extensions (such as
Multimedia Redirection) matches local audio settings.
root/ConnectionType/freerdp/connections/
<UUID>/startMode
If set to the default focus and the connection is already started,
the connection will be given focus. Otherwise, an error will be
returned stating that the connection is already started.
92 Appendix D Registry keys