HP ThinPro 7.0 - Administrator Guide

Registry key Description
root/ConnectionType/view/connections/<UUID>/
loginfields/showpassword
If set to 1, the Show password check box is shown in the login
dialog for the connection. If set to 2, the check box is shown but
disabled. If set to 0, the check box is hidden.
root/ConnectionType/view/connections/<UUID>/
loginfields/smartcard
If set to 1, the Smart card login check box is shown in the login
dialog for the connection. If set to 2, the check box is shown but
disabled. If set to 0, the check box is hidden. This check box might
not appear if no smart card is detected, even if this option is
enabled.
root/ConnectionType/view/connections/<UUID>/
loginfields/username
If set to 1, the User Name eld is shown in the login dialog for the
connection. If set to 2, the eld is shown but disabled. If set to 0,
the eld is hidden.
root/ConnectionType/view/connections/<UUID>/
networkCondition
Allows the selection of the network conditions for the best
experience.
root/ConnectionType/view/connections/<UUID>/
password
Sets the default password to supply to the remote host during
login. This value will be encrypted. Generally, this setting is used
for kiosk-style applications where a generic password is used for
login.
root/ConnectionType/view/connections/<UUID>/
preferredProtocol
Sets the preferred protocol.
root/ConnectionType/view/connections/<UUID>/
printerMapping
If set to 1, all printers dened locally via CUPS are redirected to
the remote host via ThinPrint. If set to 0, the printer mapping is
disabled. If set to 2, the USB printers are redirected as congured
in USB Manager.
root/ConnectionType/view/connections/<UUID>/
saveCredentials
root/ConnectionType/view/connections/<UUID>/
server
Sets the address of the remote host to connect to. This is typically
a URL such as http://server.domain.com.
root/ConnectionType/view/connections/<UUID>/
sessionEndAction
root/ConnectionType/view/connections/<UUID>/
singleDesktop
root/ConnectionType/view/connections/<UUID>/
smartcard
If set to 1, locally-attached smart cards are forwarded to the
remote host, allowing them to be used by applications on the
remote host. This only enables smart card login for the remote
host, not for View Connection Server.
root/ConnectionType/view/connections/<UUID>/
startMode
If set to the default focus and the connection is already started,
the connection will be given focus. Otherwise, an error will be
returned stating that the connection is already started.
root/ConnectionType/view/connections/<UUID>/
useCurrentViewConfig
If set to 1, the HP scripts do not create a new /etc/vmware/
config le and the VMware Horizon View client uses the
current
/etc/vmware/config le.
root/ConnectionType/view/connections/<UUID>/
username
Sets the default user name to supply to the remote host during
login. Generally, this setting is used for kiosk-style applications
where a generic user name is used for login.
root/ConnectionType/view/connections/<UUID>/
viewSecurityLevel
If set to Refuse insecure connections, the VMware
Horizon View client will not allow a user to connect to View
Connection Server if the server's SSL certicate is invalid. If set to
Warn, the VMware Horizon View client will display a warning if the
server's certicate is not able to be veried, and if the certicate
110 Appendix D Registry keys