HP ThinPro 7.0 - Administrator Guide

Registry key Description
root/ConnectionType/xen/general/saveLogs
If set to 1, detailed log information is saved after the session
ends. This log information will be saved to the following
directory: /tmp/debug/citrix/<date>/
root/ConnectionType/xen/general/
serverCheckTimeout
root/ConnectionType/xen/general/
sessionReliabilityTTL
Species the session reliability timeout in seconds. This
congures the Session Reliability Time To Live (TTL).
root/ConnectionType/xen/general/
sessionSharingClient
If set to 1, session-sharing requests are sent to other Citrix
sessions on the same X display. This setting directly maps to the
Citrix .ini le setting EnableSessionSharingClient.
root/ConnectionType/xen/general/
showOnAllMonitors
If set to 1, the virtual desktop will be shown on all monitors.
root/ConnectionType/xen/general/
smartCardModuleMap/CoolKeyPK11
Species the path to the CoolKey PKCS #11 smart card
security module.
root/ConnectionType/xen/general/
smartCardModuleMap/GemaltoDotNet
Species the path to the Gemalto .NET smart card security
module.
root/ConnectionType/xen/general/sound
Sets the sound quality. This setting indirectly maps to the
Citrix .ini le setting AudioBandwidthLimit.
root/ConnectionType/xen/general/speedScreen
root/ConnectionType/xen/general/tcpAccel
root/ConnectionType/xen/general/tcpAddresses/
<UUID>/address
root/ConnectionType/xen/general/topMonitor
Sets the screen area of the top monitor to show the virtual
desktop. If set to 0, the monitor is not used to show the virtual
desktop.
root/ConnectionType/xen/general/
transparentKeyPassthrough
Controls how certain Windows key combinations handled. If set to
Translated, the key combinations apply to the local desktop. If
set to Direct in full screen desktops only, the key
combinations apply to the remote session only when it is in full
screen mode. If set to Direct, the key combinations always
apply to the remote session as long as the window has focus. This
setting indirectly maps to the Citrix .ini le setting
TransparentKeyPassthrough.
root/ConnectionType/xen/general/
transportProtocol
Sets the transport protocol. If set to On (default), the connection
uses UDP and does not fall back on TCP if there is a failure. If set
to Off, the connection uses TCP. If set to Preferred, the
connection tries to use UDP rst and falls back on TCP if there is a
failure.
root/ConnectionType/xen/general/
twRedundantImageItems
Controls the number of screen areas that will be tracked in
ThinWire to prevent redundant drawing of bitmap images. An
adequate value for 1024 × 768 sessions is 300.
root/ConnectionType/xen/general/
useAlternateAddress
If set to 1, an alternate address is used for rewall connections.
This setting directly maps to the Citrix .ini le setting
UseAlternateAddress.
root/ConnectionType/xen/general/
useBitmapCache
If set to 1, the persistent disk cache is enabled. The persistent
disk cache stores commonly-used graphical objects such as
bitmaps on the hard disk of the thin client. Using the persistent
disk cache increases performance across low-bandwidth
128 Appendix D Registry keys