HP ThinPro 7.0 - Administrator Guide

Registry key Description
root/Network/IPSec/IPSecRules/<UUID>/
QMLifetimeSeconds
Sets the phase 2 lifetime.
root/Network/IPSec/IPSecRules/<UUID>/
RuleDescription
Sets the description for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/
RuleEnable
If set to 1, the rule is enabled.
root/Network/IPSec/IPSecRules/<UUID>/RuleName
Sets the name for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/SrcAddr
Sets the source address for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/
TunnelDstAddr
Sets the tunnel destination address for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/
TunnelEnable
Enables tunnel mode for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/
TunnelSrcAddr
Sets the tunnel source address for the IPSec rule.
root/Network/KeepPreviousDNS
If set to 1, previously-congured DNS servers and search domains
not generated by the Network Manager will be kept in resolv.conf.
If set to 0, resolv.conf will be overwritten completely.
root/Network/SearchDomains
Additional search domains for FQDN resolution can be specied
here. The specied domains will be appended to any incomplete
server denitions in an attempt to generate an FQDN that can be
resolved via DNS. For example, a search domain of
mydomain.com will allow the server denition myserver to
resolve properly to myserver.mydomain.com, even if the
DNS server does not have myserver in its name resolution
tables. Up to ve additional search domains can be specied.
root/Network/VPN/AutoStart
If set to 1, VPN starts automatically when the system starts up.
root/Network/VPN/PPTP/Domain
Sets the PPTP domain.
root/Network/VPN/PPTP/Gateway
Sets the PPTP gateway.
root/Network/VPN/PPTP/Password
Sets the PPTP user password.
root/Network/VPN/PPTP/Username
Sets the PPTP username.
root/Network/VPN/Type
Sets the VPN type.
root/Network/VPN/VPNC/DPDEndianess
Sets the endianness of the DPD sequence number (see rfc3706).
0: big endian; 1: little endian. Try toggling this if the session
aborts intermittently for no apparent reason.
root/Network/VPN/VPNC/DPDInterval
Sets the DPD interval (see rfc3706) in seconds.
root/Network/VPN/VPNC/DebugLevel
Sets the debug level to either 0, 1, 2, 3, or 99. This generates a lot
of logs. Enable this only when you need to troubleshoot a VPN
issue.
root/Network/VPN/VPNC/Domain
Sets the VPNC domain.
root/Network/VPN/VPNC/Gateway
Sets the VPNC gateway.
root/Network/VPN/VPNC/Group
Sets the VPNC group.
root/Network/VPN/VPNC/GroupPassword
Sets the VPNC group password.
root/Network/VPN/VPNC/IKEDHGroup
Sets the VPNC IKE Die-Hellman group.
136 Appendix D Registry keys