HP ThinPro 7.0 - Administrator Guide

Registry key Description
root/Network/Wireless/Profiles/<UUID>/IPv6/
DefaultGateway
Sets the default gateway the device uses to communicate with
the Internet. Typically, this Is the IP address of the router. This
setting takes eect only if Method is set to Static.
root/Network/Wireless/Profiles/<UUID>/IPv6/
Enabled
If set to 1, IPv6 is enabled for this prole.
root/Network/Wireless/Profiles/<UUID>/IPv6/
Method
If set to Automatic, the client uses DHCP to attempt to retrieve
network settings. If set to Static, the values of the Address,
SubnetMask, and DefaultGateway registry keys are used.
HP does not recommend using Static in a generic client prole,
because all clients would use the same IP address.
root/Network/Wireless/Profiles/<UUID>/IPv6/
SubnetMask
Sets the subnet mask of the device, which is usually the IPv6
prex length. This setting takes eect only if Method is set to
Static.
root/Network/Wireless/Profiles/<UUID>/
PowerEnable
If set to 1, power management of the wireless network card is
enabled.
root/Network/Wireless/Profiles/<UUID>/
Priority
Denes the priority of the network. For a wireless network, a
larger number means a higher priority. High priority is preferred
for a wireless network connection.
root/Network/Wireless/Profiles/<UUID>/SSID
Sets the wireless access point to use via SSID.
root/Network/Wireless/Profiles/<UUID>/
SSIDHidden
Species whether the SSID of the wireless access point is hidden.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPFAST/AnonyIdentity
Sets the anonymous identity for EAP-FAST authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPFAST/FastProvision
Sets the provisioning option for EAP-FAST authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPFAST/PACFile
Sets the path to the PAC le for EAP-FAST authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPFAST/Password
Sets the password for EAP-FAST authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPFAST/Username
Sets the username for EAP-FAST authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPPEAP/AnonyIdentity
Sets the anonymous identity for EAP PEAP authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPPEAP/CACert
Sets the path to the CA certicate le for EAP PEAP
authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPPEAP/InnerAuth
Sets the PEAP inner authentication protocol.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPPEAP/PEAPVer
Sets the PEAP version.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPPEAP/Password
Sets the password for EAP PEAP authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPPEAP/Username
Sets the username for EAP PEAP authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPTLS/CACert
Sets the path to the CA certicate le for TLS authentication.
Network 141