HP ThinPro 7.0 - Administrator Guide

Registry key Description
root/Network/Wireless/Profiles/<UUID>/
Security/EAPTLS/Identity
Sets the identity for TLS authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPTLS/PrivateKey
Sets the path to a private key le for TLS authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPTLS/PrivateKeyPassword
Sets the password to a private key le for TLS authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPTLS/UserCert
Sets the path to a user certicate le for TLS authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPTTLS/AnonyIdentity
Sets the anonymous identity for TTLS authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPTTLS/CACert
Sets the path to a CA certicate le for TTLS authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPTTLS/InnerAuth
Sets the TTLS inner authentication protocol.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPTTLS/Password
Sets the password for TTLS authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/EAPTTLS/Username
Sets the username for TTLS authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/PSK/PreSharedKey
Sets the password for PSK authentication.
root/Network/Wireless/Profiles/<UUID>/
Security/Type
Sets the wireless authentication type.
root/Network/Wireless/Profiles/<UUID>/
Security/WEP/AuthType
Sets the WEP authentication type.
root/Network/Wireless/Profiles/<UUID>/
Security/WEP/Key
Sets the WEP password.
root/Network/Wireless/Profiles/<UUID>/
Security/WEP/KeyIndex
Sets the WEP password index.
root/Network/Wireless/Profiles/<UUID>/
Security/WirelessBand
Species the frequency range selection. Select Auto to scan all
wireless channels; select 2.4GHz to scan only 2.4 GHz channels;
select
5GHz to scan only 5 GHz channels.
root/Network/Wireless/Profiles/<UUID>/
Security/WirelessInterface
Sets the wireless interface for the prole.
root/Network/Wireless/Roaming/
enableRoamingOptions
If set to 1, wireless roaming options are congurable.
root/Network/Wireless/Roaming/
longScanInterval
Species how often, in seconds, to scan for an access point with a
stronger signal when the signal strength is above the roaming
threshold. The default is 60.
root/Network/Wireless/Roaming/roamingNap
Species how often, in seconds, the connection sleeps when the
wpa_applicant status changes. This helps reduce spurious Wi-Fi
events from breaking live connections when roaming occurs.
root/Network/Wireless/Roaming/
roamingThreshold
Sets the minimum signal strength, in dBm, allowed before
attempting to roam to a stronger access point. Note that this
value is negative.
142 Appendix D Registry keys