HP ThinPro 7.0 - Administrator Guide

Registry key Description
root/ScepMgr/ScepEnroll/ScepServers/<UUID>/
ServerUrl
Sets the SCEP server URL, which is necessary for the SCEP client
to enroll a certicate.
root/ScepMgr/ScepEnroll/ScepServers/<UUID>/
Status/Code
Contains the status code of the SCEP enrollment. This value is
read-only.
root/ScepMgr/ScepEnroll/ScepServers/<UUID>/
Status/Detail
Contains detailed information about the SCEP enrollment. This
value is read-only.
Search
Registry key Description
root/Search/Category/Miscellaneons/
CheckForUpdate
root/Search/Category/Miscellaneons/Logout
root/Search/Category/Miscellaneons/Reboot
root/Search/Category/Miscellaneons/ShutDown
root/Search/Category/Miscellaneons/Sleep
root/Search/Category/Miscellaneons/
SwitchToAdmin
root/Search/Category/Regeditor/byDir
root/Search/Category/Regeditor/byKey
root/Search/Category/Regeditor/byValue
root/Search/Category/Regeditor/byWhole
Serial
Registry key Description
root/Serial/<UUID>/baud
Sets the speed of the serial device.
root/Serial/<UUID>/dataBits
Sets how many bits are in each character.
root/Serial/<UUID>/device
Species the serial device attached to the system.
root/Serial/<UUID>/flow
Sets the ow control of the serial device, which is used to
communicate stops and starts of the serial communication.
root/Serial/<UUID>/name
Species the Windows device port for communicating with the
serial device.
root/Serial/<UUID>/parity
Sets the parity bit of the serial device. The parity bit is used for
error detection. If set to none, there is no parity detection.
Search 147