HP ThinPro 7.0 - Administrator Guide
Option Description
Enable Multimedia Redirection Allows multimedia les to be sent directly to the client for local playback.
Certicate verication policy Select one of the following:
● Accept all RDP server certicates
● Use remembered hosts; warn if unknown or invalid certicate
● Skip remembered hosts; warn if unknown or invalid certicate
● Connect only to pre-approved RDP servers
TLS Version Sets the version of Transport Layer Security to be used during the early stages of
negotiation with the RDP server. Either set this to match the version of TLS used by your
RDP server, or try setting it to auto.
NOTE: There are some server-side defects in some unpatched RDP servers that can
cause the auto setting to fail, so it is not the default setting.
Send hostname as For per-device licensing, this selects how the client hostname is sent to the RDP server.
Select hostname or mac.
Hostname to send Normally, the thin client's hostname is used for Client Access Licenses. This eld allows a
dierent value to be sent.
TIP: Select the (i) icon next to this option for more information.
Load Balance Info Use this option with a brokered RDP connection.
TIP: Select the (i) icon next to this option for more information.
NOTE: For more information about the options Enable deprecated RDP encryption and TLS Version, see
the HP ThinPro white paper Security Layers for RDP Connections (available in English only).
Local Resources
The following table describes the settings that are available under the Local Resources category when editing
an RDP connection.
NOTE: HP recommends high-level device redirection for all local devices unless there is a specic reason to
use USB redirection (USBR) instead. For more information, see the HP ThinPro white paper USB Manager
(available in English only).
Option Description
Audio Devices Determines whether audio devices are redirected by high-level RDP audio redirection,
low-level USB redirection, or disabled for this connection.
Printers Determines whether printers are redirected by high-level printer redirection (which
requires them to be set up via the Printers tool in Control Panel), low-level USB
redirection, or disabled for this connection.
Serial/Parallel Ports Determines whether serial and parallel ports are redirected or disabled for this
connection.
USB Storage Determines whether USB storage devices such as ash drives and optical drives are
redirected by high-level storage redirection, low-level USB redirection, or disabled for
this connection.
Local Partitions Determines whether local partitions of the thin client's ash drive are redirected or
disabled for this connection.
18 Chapter 4 Connection types