HP ThinPro 7.0 - Administrator Guide

Option Description
NOTE: Select Save Preferences each time you change the window size or position to
save the new values.
Run in Full Screen Mode Select to make the window full screen and remove the frame, soft buttons, menu, and
conguration bars.
NOTE: This option does not become eective until the next system launch and
overrides the Show Conguration Bar and Save Current Window Position options.
Browser Command In the box, type the command that runs your web browser, such as:
/ display html links Firefox
Command Line Start Up Options Use to specify an alternate location for the startup options.
NOTE: For specic information on HP TeemTalk Command Line Startup Options, see
the HP TeemTalk Terminal Emulator User Guide.
Advanced
NOTE: See Advanced connection settings on page 7 for information about the settings available under the
Advanced category when editing a connection.
XDMCP
NOTE: These settings aect the connection you are currently conguring only.
Conguration
The following table describes the settings that are available under the Conguration category when editing
an XDMCP connection.
Option Description
Name The connection name.
Type The XDMCP connection type. Valid options are: chooser, query, and broadcast.
Address This value is required if the Type value is set to query.
Use font server Use a remote X font server instead of locally installed fonts.
Font server Font server is not enabled unless the Use font server option is selected.
Congure display Select to set the display conguration for the connection. If you do not set this
conguration, the default conguration will be used.
Advanced
NOTE: See Advanced connection settings on page 7 for information about the settings available under the
Advanced category when editing a connection.
Secure Shell
NOTE: These settings aect only the connection you are currently conguring.
Additional connection types (ThinPro only) 33