HP ThinPro 7.0 - Administrator Guide

Conguration
The following table describes the settings that are available under the Conguration category when editing
an SSH connection.
Option Description
Name The connection name.
Address The IP address of the remote system.
Port The remote port to use for the connection.
User name The username to use for the connection.
Run application The application to run to make the connection.
Compression Select this option if you want to compress the data sent between the server and thin
client.
X11 connection forwarding If the server has an X server on it, select this option to allow the user to open user
interfaces from the SSH session and display them locally on the thin client.
Force TTY allocation Select this option and specify a command to initiate a temporary session to run the
command. Once the command has completed, the session will terminate. If no command
is specied, then the session will run normally as if the option were not selected.
Foreground color The default color of the text in the SSH session.
Background color The default color of the background in the SSH session.
Font Valid options are: 7X14, 5X7, 5X8, 6X9, 6X12, 7X13, 8X13, 8X16, 9X15, 10X20, and
12X24.
Advanced
NOTE: See Advanced connection settings on page 7 for information about the settings available under the
Advanced category when editing a connection.
Telnet
NOTE: These settings aect the connection you are currently conguring only.
Conguration
The following table describes the settings that are available under the Conguration category when editing a
Telnet connection.
Option Description
Name The name of the connection.
Address The IP address of the remote system.
Port The port to use on the remote system.
Foreground color The foreground color.
34 Chapter 4 Connection types