HP ThinPro 7.0 - Administrator Guide

Registry key Description
root/ConnectionType/freerdp/connections/
<UUID>/SingleSignOn
If enabled, the user, domain, and password combination for the
RDP connection is saved to unlock the screen saver.
root/ConnectionType/freerdp/connections/
<UUID>/address
Sets the hostname or IP address to connect to. The port number
can be appended on the end after a colon character. For example:
servername:3389
root/ConnectionType/freerdp/connections/
<UUID>/afterStoppedCommand
Sets the command to execute after the connection has been
stopped.
root/ConnectionType/freerdp/connections/
<UUID>/application
Species an alternate shell or application to run.
root/ConnectionType/freerdp/connections/
<UUID>/attachToConsole
root/ConnectionType/freerdp/connections/
<UUID>/audioLatency
Sets the average milliseconds of oset between the audio stream
and the display of corresponding video frames after decoding.
root/ConnectionType/freerdp/connections/
<UUID>/authorizations/user/edit
If set to 1, an end user has permission to modify the connection
settings for this connection.
root/ConnectionType/freerdp/connections/
<UUID>/authorizations/user/execution
If set to 1, an end user has permission to execute this connection.
root/ConnectionType/freerdp/connections/
<UUID>/autoReconnect
If set to 1, the connection will be restarted when it is closed or
disconnected.
root/ConnectionType/freerdp/connections/
<UUID>/autoReconnectDelay
Sets the amount of time in seconds to wait before reconnecting
the session. The default of 0 will cause the connection to
reconnect immediately. This setting only takes eect when
autoReconnect is set to 1.
root/ConnectionType/freerdp/connections/
<UUID>/autostart
If set to a value of 1–5, the connection will be started
automatically after the system boots, with the value of 1 having
the highest priority.
root/ConnectionType/freerdp/connections/
<UUID>/autostartDelay
Reserved for future use.
root/ConnectionType/freerdp/connections/
<UUID>/bandwidthLimitation
If set to a value greater than 0, the value represents an
approximate bandwidth limitation for downloading and uploading
in kilobytes per second. If set to 0 (the default), there is no
limitation.
root/ConnectionType/freerdp/connections/
<UUID>/beforeStartingCommand
Sets the command to execute before the connection starts.
root/ConnectionType/freerdp/connections/
<UUID>/clipboardExtension
If set to 1, clipboard functionality is enabled between dierent
RDP sessions and between RDP sessions and the local system.
root/ConnectionType/freerdp/connections/
<UUID>/compression
If set to 1, compression of RDP data sent between the client and
the server is enabled.
root/ConnectionType/freerdp/connections/
<UUID>/credentialsType
Species the credential type between sso (single sign-on),
startup (credentials are requested at startup), password
(precongured user/domain/password), or smartcard
(precongured smart card).
root/ConnectionType/freerdp/connections/
<UUID>/dependConnectionId
This registry key is either used internally or reserved for future
use. The value should not be changed.
root/ConnectionType/freerdp/connections/
<UUID>/directory
Species the startup directory where an alternate shell
application is executed.
ConnectionType 87