HP ThinPro 7.1 - Administrator Guide

Registry key Description
root/ConnectionType/xen/general/colorDepth
Forces a specic color depth for all connections. This is usually
done only in specialized environments where the automatic depth
selection fails or in very slow networks to reduce congestion.
root/ConnectionType/xen/general/colorMapping
If set to Shared - Approximate Colors, approximate
colors from the default colormap are used. If set to Private -
Exact Colors
, precise colors are used. This setting directly
maps to the Citrix .ini le setting ApproximateColors.
root/ConnectionType/xen/general/
contentRedirection
If set to 1, links from web content are sent from the server to the
client so that the client can try to open them locally.
root/ConnectionType/xen/general/debugLogLevel
If set to 0, no debug log is created. If set to 3, an error level log is
created. If set to 4, a warning level log is created. If set to 7, all
debug level logs are created.
root/ConnectionType/xen/general/
defaultBrowserProtocol
Controls the protocol used to locate the host for the connection. If
not specied, the default value from the [WFClient] section of
wfclient.ini is used. This setting directly maps to the Citrix .ini le
setting BrowserProtocol.
root/ConnectionType/xen/general/
drivePathMappedOnA ... drivePathMappedOnZ
Sets the local lesystem directory to map to the remote host.
Typically this is set to /media to allow all connected USB drives
to be mapped to the remote host via a single drive letter.
root/ConnectionType/xen/general/
enableAlertSound
If set to 1, Windows alert sounds are enabled. This setting
indirectly maps to the Citrix .ini le setting DisableSound.
root/ConnectionType/xen/general/
enableClipboard
If set to 1, clipboard redirection is enabled.
root/ConnectionType/xen/general/
enableConnectionBar
If set to 1, enables Citrix Desktop Viewer in the session user
interface. By default, this setting is set to 0 (disabled) on the
client side because this value is set on the client by the ICA le for
a desktop session.
root/ConnectionType/xen/general/
enableCursorColors
If set to 1, colored cursors are enabled. Setting this to 0 might x
graphical cursor corruption in some cases.
root/ConnectionType/xen/general/
enableDataCompression
If set to 1, data compression is enabled. This setting directly maps
to the Citrix .ini le setting Compress.
root/ConnectionType/xen/general/
enableDriveMapAndRedirect
If set to 1, mapping and redirection for USB storage devices is
enabled.
root/ConnectionType/xen/general/
enableDriveMapping
If set to 1, directories on the local lesystem can be forwarded to
the remote host via a virtual drive. Typically /media is mapped
to Z to allow USB drives to be forwarded to the remote host. If
USB redirection is enabled, this setting should be disabled to
prevent storage conicts. To be properly mapped to the remote
host in this fashion, the USB device must use one of the following
lesystems: FAT32, NTFS, ext2, ext3.
root/ConnectionType/xen/general/
enableDynamicDriveMapping
If set to 1, USB storage devices will be dynamically mapped on the
Citrix server. If set to 0, dynamic mapping of USB storage devices
is disabled.
root/ConnectionType/xen/general/
enableH264Compression
If set to 1, H.264 compression is enabled. The H.264 codec
provides better performance of rich and professional graphics
applications on WAN networks than the JPEG codec.
root/ConnectionType/xen/general/
enableHDXFlashRedirection
NOTE: This feature is supported for the 32-bit version of HP
ThinPro only.
124 Appendix D Registry keys