HP ThinPro 7.1 - Administrator Guide

Registry key Description
set to Direct in full screen desktops only, the key
combinations apply to the remote session only when it is in full
screen mode. If set to Direct, the key combinations always
apply to the remote session as long as the window has focus. This
setting indirectly maps to the Citrix .ini le setting
TransparentKeyPassthrough.
root/ConnectionType/xen/general/
transportProtocol
Sets the transport protocol. If set to On (default), the connection
uses UDP and does not fall back on TCP if there is a failure. If set
to Off, the connection uses TCP. If set to Preferred, the
connection tries to use UDP rst and falls back on TCP if there is a
failure.
root/ConnectionType/xen/general/
twRedundantImageItems
Controls the number of screen areas that will be tracked in
ThinWire to prevent redundant drawing of bitmap images. An
adequate value for 1024 × 768 sessions is 300.
root/ConnectionType/xen/general/
useAlternateAddress
If set to 1, an alternate address is used for rewall connections.
This setting directly maps to the Citrix .ini le setting
UseAlternateAddress.
root/ConnectionType/xen/general/
useBitmapCache
If set to 1, the persistent disk cache is enabled. The persistent
disk cache stores commonly-used graphical objects such as
bitmaps on the hard disk of the thin client. Using the persistent
disk cache increases performance across low-bandwidth
connections but reduces the amount of available disk space on
the thin client. For thin clients on high-speed LANs, usage of the
persistent disk cache is not necessary. This setting directly maps
to the Citrix .ini le setting PersistentCacheEnabled.
root/ConnectionType/xen/general/useEUKS
Controls the use of Extended Unicode Keyboard Support (EUKS)
on Windows servers. If set to 0, EUKS is not used. If set to 1, EUKS
is used as a fallback. If set to 2, EUKS is used whenever possible.
root/ConnectionType/xen/general/useLocalIM
If this setting is enabled, the local X input method is used to
interpret keyboard input. This is supported for European
languages only. This setting directly maps to the Citrix .ini le
setting useLocalIME.
root/ConnectionType/xen/general/userAgent
The string from this key will be presented by the Citrix client and
will be helpful for administrators to know where the connection
request is from.
root/ConnectionType/xen/general/
waitForNetwork
If set to 1, the connection will not be launched until networking is
available. This ensures that, on a slow network, the connection
does not launch before networking is available, which could cause
a failure.
root/ConnectionType/xen/general/
webcamFramesPerSec
Controls the HDXWebCamFramesPerSec variable in the
All_Regions.ini le.
root/ConnectionType/xen/general/webcamHeight
Controls the HDXWebCamHeight variable in the
All_Regions.ini le.
root/ConnectionType/xen/general/webcamQuality
Controls the HDXWebCamQuality variable in the
All_Regions.ini le. Valid input ranges from 1 to 63.
root/ConnectionType/xen/general/webcamSupport
If set to 0, the webcam and webcam audio are disabled. If set to 1,
the webcam and webcam audio are enabled, with compression. If
set to 2, USB redirection of the webcam and webcam audio is
enabled.
128 Appendix D Registry keys