HP ThinPro 7.1 - Administrator Guide

Registry key Description
root/Network/DefaultHostnamePattern
Sets the default hostname pattern to use when generating a new
hostname. This is used if the Hostname registry key and /etc/
hostname are both empty. The hostname pattern uses % as a
delimiter. In the example HPTC%MAC:1-6%, HPTC would be the
prex, and the rst six characters of the thin client MAC address
would follow. So if the MAC address of the thin client is
11:22:33:44:55:66, the generated hostname would be
HPTC112233. If the pattern is TC%MAC%, the generated
hostname would be
TC112233445566. If the pattern is HP
%MAC:7%, the generated hostname would be HP1122334.
root/Network/EncryptWpaConfig
If set to 1, the password is encrypted.
root/Network/FtpProxy
Sets the FTP proxy address. HP recommends using the following
format for this value because the http prex is better supported:
http://ProxyServer:Port
root/Network/Hostname
Sets the hostname of the thin client.
root/Network/HttpProxy
Sets the HTTP proxy address. HP recommends using the following
format: http://ProxyServer:Port
root/Network/HttpsProxy
Sets the HTTPS proxy address. HP recommends using the
following format for this value because the http prex is better
supported: http://ProxyServer:Port
root/Network/IPSec/IPSecRules/<UUID>/DstAddr
Sets the destination address for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethod
Sets the authentication method for the IPSec rule. PSK is for
using a pre-shared key, and Certificate is for using
certicate les.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethodCACert
If the authentication method is Certificate, the CA certicate
le path is saved in this registry key.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethodClientCert
If the authentication method is Certificate, the client
certicate le path is saved in this registry key.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethodPresharedKey
If the authentication method is PSK, the pre-shared key value is
saved in this registry key.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethodPrivateKey
If the authentication method is Certificate, the private key
le path that corresponds with the client certicate is saved in
this registry key.
root/Network/IPSec/IPSecRules/<UUID>/
MMDHGroup
Sets the phase 1 Diie-Hellman group.
root/Network/IPSec/IPSecRules/<UUID>/
MMEncryptionAlg
Sets the phase 1 encryption algorithm.
root/Network/IPSec/IPSecRules/<UUID>/
MMIntegrityAlg
Sets the phase 1 integrity algorithm.
root/Network/IPSec/IPSecRules/<UUID>/
MMLifetimeMinutes
Sets the phase 1 lifetime.
root/Network/IPSec/IPSecRules/<UUID>/
QMAHEnable
Enables phase 2 AH.
root/Network/IPSec/IPSecRules/<UUID>/
QMAHIntegrityAlg
Sets the phase 2 AH integrity algorithm.
Network 133