HP ThinPro 7.1 - Administrator Guide

Registry key Description
root/Network/Wired/Security/PrivateKey
Sets the path to a private key le. This is only used for TLS
authentication.
root/Network/Wired/Security/Type
Sets the 802.1x authentication type.
root/Network/Wired/Security/UserCert
Sets the path to a user certicate le. This is only used for TLS
authentication.
root/Network/Wired/Security/Username
Sets the username.
root/Network/Wired/SubnetMask
Sets the subnet mask of the device, such as 255.255.255.0 (for a
standard class C subnet). This setting will only take eect when
Method is set to Static.
root/Network/Wired/UseWiredProfiles
If set to 1, the wired connection is congured in prole mode,
which can connect to multiple wired networks. If set to 0, it can
connect to only one wired network.
root/Network/WiredWirelessSwitch
If set to 0, a wired network and a wireless network can be
connected simultaneously. If set to 1, the wired network takes
priority over the wireless network; that is, if the wired network
cannot connect, a congured wireless network is used.
root/Network/Wireless/DefaultGateway
Sets the default gateway the device will use to communicate with
the Internet. Typically this is the IP address of the router. This
setting will only take eect when Method is set to Static.
root/Network/Wireless/EnableDefGatewayAsDNS
If set to 1, the default gateway will also be the name server.
root/Network/Wireless/EnableWireless
If set to 1, wireless functionality is enabled. If set to 0, wireless
functionality Is disabled.
root/Network/Wireless/IPAddress
Sets the IPv4 address of the thin client. This setting will only take
eect when Method is set to Static.
root/Network/Wireless/IPv6Enable
If set to 1, IPv6 is enabled.
root/Network/Wireless/Interface
Sets the default wireless interface or wireless network adapter.
root/Network/Wireless/Method
If set to Automatic, the thin client will use DHCP to attempt to
retrieve network settings. If set to Static, the values of the
IPAddress, SubnetMask, and DefaultGateway registry
keys are used. HP does not recommend using Static in a
generic client prole because it will cause all thin clients to
receive the same IP address.
root/Network/Wireless/PowerEnable
If set to 1, power management of the wireless network card is
enabled.
root/Network/Wireless/Profiles/<UUID>/
AutoConnect
If set to 1, automatic connection to the SSID is enabled.
root/Network/Wireless/Profiles/<UUID>/IPv4/
Address
Sets the IPv4 address of the client. This setting takes eect only if
Method is set to Static.
root/Network/Wireless/Profiles/<UUID>/IPv4/
DefaultGateway
Sets the default gateway the device uses to communicate with
the Internet. Typically, this Is the IP address of the router. This
setting takes eect only if Method is set to Static.
root/Network/Wireless/Profiles/<UUID>/IPv4/
Enabled
If set to 1, IPv4 is enabled for this prole.
root/Network/Wireless/Profiles/<UUID>/IPv4/
Method
If set to Automatic, the client uses DHCP to retrieve network
settings. If set to Static, the values of the Address,
SubnetMask, and DefaultGateway registry keys are used.
138 Appendix D Registry keys