HP ThinPro 7.1 - Administrator Guide

Registry key Description
root/Power/currentPowerPlan
This registry key selects which power plan is used. This is
automatically set to default.
root/Power/default/AC/brightness
Sets the default brightness percentage level for when the mobile
thin client is plugged in.
root/Power/default/AC/cpuMode
Sets the CPU mode for a power plan while the computer is
connected to AC power. By default, it is set to performance.
root/Power/default/AC/lidAction
Sets the action that occurs when the computer lid is closed while
the computer is connected to AC power. By default, it is set to
Sleep.
root/Power/default/AC/powerButtonAction
Sets the action that occurs when the power button is pressed
while the computer is connected to AC power. By default, it is set
to shutdown.
root/Power/default/AC/sleep
Sets the value (in minutes) that the computer waits before it
enters the Sleep state while the computer is connected to AC
power. By default, it is set to 30. If set to 0, the computer never
enters the Sleep state.
root/Power/default/AC/standby
Sets the value (in minutes) that the computer waits before the
display turns o while the computer is connected to AC power. By
default, it is set to 15. If set to 0, the computer never enters
standby mode.
root/Power/default/AC/timeoutDim
This key is currently not in use.
root/Power/default/battery/brightness
Sets the default brightness percentage level for when the mobile
thin client is not plugged in.
root/Power/default/battery/cpuMode
Sets the CPU mode for a power plan while the computer is not
connected to AC power. By default, it is set to ondemand.
root/Power/default/battery/critical/
criticalBatteryAction
Sets the action to perform when the battery is at the critical
charge level, dened by criticalBatteryLevel.
root/Power/default/battery/critical/
criticalBatteryLevel
Sets the percentage threshold for when the battery is considered
to be at a critical level of power.
root/Power/default/battery/lidAction
Sets the action that occurs when the computer lid is closed while
the computer is not connected to AC power. By default, it is set to
Sleep.
root/Power/default/battery/low/brightness
Sets the default brightness percentage level for when the battery
is running low on power.
root/Power/default/battery/low/cpuMode
Sets the CPU mode (performance or on demand).
root/Power/default/battery/low/
lowBatteryLevel
Sets the percentage of battery power left for when the battery is
considered to be at a low level of power.
root/Power/default/battery/low/sleep
Sets the value (in minutes) that the computer waits before it
enters the Sleep state while the computer is not connected to AC
power. By default, it is set to 30. If set to 0, the computer never
enters the Sleep state.
root/Power/default/battery/low/standby
Sets the value (in minutes) that the computer waits before the
display turns o while the computer is not connected to AC power.
By default, it is set to 15. If set to 0, the computer never enters
standby mode.
root/Power/default/battery/low/timeoutDim
This key is currently not in use.
Power 143