HP ThinPro 7.1 - Administrator Guide

Registry key Description
root/vncserver/coreSettings/vncNotifyUser
If set to 1, a notication is shown to the user when someone is
attempting to connect to the thin client using VNC.
root/vncserver/coreSettings/vncPassword
Sets the password for VNC shadowing. The key
vncUsePassword must also be enabled.
root/vncserver/coreSettings/vncReadOnly
If set to 1, VNC shadowing will operate in view-only mode.
root/vncserver/coreSettings/
vncRefuseInDefault
If set to 1, VNC requests are refused automatically if the user does
not interact with the notication dialog before the timeout.
root/vncserver/coreSettings/vncStopButton
If set to 1, an always-on-top button is shown on the left corner of
the screen. Selecting that button disconnects the VNC session.
root/vncserver/coreSettings/
vncTakeEffectRightNow
If set to 1, VNC settings take eect immediately after being
modied.
root/vncserver/coreSettings/vncUseHTTP
If set to 1, HTTP port 5800 is open for VNC connections.
root/vncserver/coreSettings/vncUsePassword
If set to 1, the password specied in vncPassword is required
for VNC shadowing.
root/vncserver/coreSettings/vncUseSSL
If set to 1, SSL is used for VNC connections.
root/vncserver/gui/VNCShadowManager/name
This registry key is either used internally or reserved for future
use. The value should not be changed.
root/vncserver/gui/VNCShadowManager/status
This registry key is either used internally or reserved for future
use. The value should not be changed.
root/vncserver/gui/VNCShadowManager/title
This registry key is either used internally or reserved for future
use. The value should not be changed.
root/vncserver/gui/VNCShadowManager/widgets/
enableVncShadow
Controls the state of the Enable VNC Shadow widget in the VNC
Shadow tool. If set to active, the widget is visible in the UI and
the user can interact with it. If set to inactive, the widget is
hidden. If set to read-only, the widget is visible in the read-
only state.
root/vncserver/gui/VNCShadowManager/widgets/
userNotificationMessage
Controls the state of the User Notication Message widget in the
VNC Shadow tool. If set to active, the widget is visible in the UI
and the user can interact with it. If set to inactive, the widget
is hidden. If set to read-only, the widget is visible in the read-
only state.
root/vncserver/gui/vncAllowLoopbackOnly
Controls the state of the Allow Loopback Connections Only
widget in the VNC Shadow utility. If set to active, the widget is
visible in the UI and the user can interact with it. If set to
inactive, the widget is hidden. If set to read-only, the
widget is visible in the read-only state.
root/vncserver/gui/VNCShadowManager/widgets/
vncNotifyShowTimeout
Controls the state of the VNC Show Timeout for Notication
widget in the VNC Shadow tool. If set to active, the widget is
visible in the UI and the user can interact with it. If set to
inactive, the widget is hidden. If set to read-only, the
widget is visible in the read-only state.
root/vncserver/gui/VNCShadowManager/widgets/
vncNotifyTimeout
Controls the state of the numerical widget in the VNC Shadow
tool. If set to active, the widget is visible in the UI and the user
can interact with it. If set to inactive, the widget is hidden. If
set to read-only, the widget is visible in the read-only state.
root/vncserver/gui/VNCShadowManager/widgets/
vncNotifyUser
Controls the state of the VNC Notify User to Allow Refuse widget
in the VNC Shadow tool. If set to active, the widget is visible in
166 Appendix D Registry keys