HP ThinPro 7.1 - Administrator Guide

Option Description
NOTE: Citrix processing delays might increase the auto-logout time.
Advanced
NOTE: See Advanced connection settings on page 10 for information about the settings available under the
Advanced category when editing a connection.
RDP
The RDP client is based on FreeRDP 1.1 and meets the following requirements for RDP:
● Hardware-accelerated RemoteFX
● MMR supported when connecting to Windows hosts with the Desktop Experience feature enabled
● USBR supported when connecting to RDP servers that enable it
RDP per-connection settings
NOTE: These settings aect the connection you are currently conguring only.
Network
The following table describes the settings that are available under the Network category when editing an RDP
connection.
Option Description
Connection Name A custom name for this connection.
Server Name/Address The IP address or server name for this connection, or the RD Web Access feed URL. If
required, the port can be appended to the server after a colon (by default, the port is
3389 for a direct RDP connection).
NOTE: The RD Web Access feed URL must begin with https://. By default, this is
added automatically as specied by the rdWebFeedUrlPattern registry key, which
denes the pattern of the URL.
Credentials ● Use Single Sign-On credentials: The credentials used at login are also used to start
the connection.
● Ask for credentials at connection start: There are no pre-supplied credential
components.
● Use predened user, password, and/or domain: Some or all of the credentials are
stored and supplied for the connection.
● Use predened smart card: The connection is expected to be used with a smart
card for authentication.
User The username for this connection.
Password The password for this connection.
Domain The domain name for this connection (optional).
RDP 19