HP ThinPro 7.1 - Administrator Guide
Option Description
Scan AP Scans for available wireless networks.
SSID Use this box to manually enter the SSID of the wireless network if it is not found by the scan.
Wireless Band Select Auto, 2.4GHz, or 5GHz.
SSID Hidden Enable this option if the SSID of the wireless network is set to be hidden (not broadcasting).
Enable IPv6 Enables IPv6. IPv4 is used by default, and they cannot be used at the same time.
Enable Power Management Enables the power management feature for the wireless adapter.
Connection Method Lets you select between Automatic and Static. If your network environment is using DHCP, then the
Automatic option should work without any further congurations.
If Static is selected, the Static Address Conguration settings will become available. Be sure to input
these values according to whether you are using IPv4 or IPv6.
Security Settings Lets you set the authentication setting to one of the following:
● None
● WEP
● WPA/WPA2-PSK
● 802.1X-TTLS
● 802.1X-PEAP
● 802.1X-TLS
● EAP-FAST
For WEP and WPA/WPA2-PSK, you just need to enter the network key and select OK.
For EAP-FAST, set Anonymous Identity, Username, Password, and Provisioning Method. You do not
need to change the PAC le settings.
See Wired network settings on page 46 for more information about TTLS, PEAP, and TLS.
Auto Connect This option is reserved for future use.
Enable Wireless Enables the wireless adapter.
Use the IPv4 tab to congure IPv4 connection settings.
Option Description
IPv4 Enabled Enables IPv4.
IPv4 Method Lets you select between Automatic and Static. If your network environment is using DHCP, then the
Automatic option should work without any further congurations.
If Static is selected, the Static Address Conguration settings are displayed, and you must enter the
IPv4 settings.
Use the IPv6 tab to congure IPv6 connection settings.
Option
Description
IPv6 Enabled Enables the usage of an IPv6 global address.
System 47