HP ThinPro 7.1 - Administrator Guide
Hardware
Menu option Description
Display Lets you congure and test display options.
For more information, see Display management on page 60.
Sound Lets you control the playback, input devices, and input audio
levels.
USB Manager Lets you congure the redirection options for USB devices.
For more information, see Redirecting USB devices on page 60.
Serial Manager Lets you congure serial devices.
Printers Lets you set up local and network printers. Local printers can be
shared across the network.
For more information, see Conguring printers on page 60.
Display management
Display management allows you to congure screen settings and apply these changes in session. To open
display management:
Control Panel>Hardware>Display Management.
Redirecting USB devices
To redirect USB devices:
1. In Control Panel, select Hardware, and then select USB Manager.
2. On the Protocol page, select a remote protocol.
If the setting is Local, you can also specify the options allow devices to be mounted and mount devices
read-only.
3. On the Devices page, you can enable or disable redirection for individual devices if necessary.
4. On the Classes page, you can select specic device classes to be redirected to remote sessions.
5. When you are nished, select Apply.
Conguring printers
To congure a printer:
1. Select Hardware and then select Printers in Control Panel.
2. In the Printing dialog, select Add .
3. In the New Printer dialog, select the printer to congure, and then select Forward.
NOTE: If you select a serial printer, be sure to input the correct settings on the right side of the dialog,
or the printer might not function correctly.
4. Select the make of the printer. If you are unsure, select the Generic (recommended) option, and then
select Forward.
60 Chapter 9 Control Panel