HP Velocity - Administrator Guide

Administrator Guide for Thin Clients | HP Velocity

HP Velocity operation on Windows

This section covers the following information:

• HP Velocity operational modes

• Setting the HP Velocity operational mode on Windows

• Identifying the HP Velocity version on Windows

For information about setting the HP Velocity operational mode and identifying the HP Velocity version on HP ThinPro,

see Appendix: HP Velocity configuration on HP ThinPro on page 38.

HP Velocity operational modes

The HP Velocity icon appears in the notification area in a color that corresponds to the current HP Velocity operational

mode (Table 2 on page 8).

Figure 8: HP Velocity icon on Windows

Table 2: HP Velocity icon color codes

Note: On Windows platforms, positioning the cursor over the HP Velocity icon when HP Velocity is in Protect mode

displays a tooltip indicating the number of active connections.

Icon color Mode Description

Green Protect HP Velocity is enabled and is protecting one or more flows between HP Velocity-enabled

endpoints. In this mode, HP Velocity continuously monitors end-to-end network conditions to

activate and adjust enabled HP Velocity optimizers (such as LiveQ packet loss protection, LiveWiFi,

and LiveTCP latency mitigation).

Blue Protect HP Velocity is enabled and ready to protect, but flows have not been established.

Orange Monitor HP Velocity is profiling present and trending network conditions but will not apply enabled

HP Velocity optimizers.

Note: HP Velocity server-to-server flows are monitored only.

Gray Off HP Velocity is disabled.