HP Velocity - Administrator Guide

Administrator Guide for Thin Clients | HP Velocity

• Whitelist Ports TCP/UDP—The TCP/UDP ports whose application flows HP Velocity will protect when the following

criteria are met:

- The destination IP address for the application flow is not specified in the Blacklist IP filter.

- The destination IP address for the application flow is specified in the Whitelist IP filter.

Important: When the IP Whitelist filter is configured, HP Velocity will protect an application flow only if its destination IP

address matches an address included in this filter.

Note: If the IP Whitelist filter includes subnet destination IP addresses, the IP Blacklist filter can be used to filter IP

addresses in that subnet whose application flows HP Velocity will not protect.

Table 7: Policy filters (port & IP) settings

Note: Use the CIDR format for IP addresses. To enter multiple IP addresses or port numbers in a field, use a

space-separated list; for example, 192.168.1.0/24 145.76.53.3/32 or 80 1750 1751.

Figure 16: HP Velocity administrative template - Policy Filters (Port & IP)

Parameter Default Evaluation order

Blacklist IP 255.255.255.255/32 1

Whitelist IP All IP addresses 2

Blacklist TCP/UDP Ports TCP: 21 53 67-68 123 137-139 161 500 1194 2869

3702 4500 5355 5357 9100 17500

UDP: 21 53 67-68 123 137-139 161 500 546-547

631 1194 1900 2869 3702 4500 5353 5355 5357

9100 17500 42966

Whitelist TCP/UPD Ports All ports 3