HP Velocity - Administrator Guide

38
Administrator Guide for Thin Clients | HP Velocity
Appendix: HP Velocity configuration on HP ThinPro
HP Velocity provides a default configuration suitable for most deployments. It also provides a configuration interface
(/proc) that enables users with root privileges to temporarily modify configuration settings and query status on
HP ThinPro.
The /proc/net/hp-velocity/ file provides access to the following parameter files:
• config/about
• config/commit
• config/general/factorydefault
• config/liveq
• config/livetcp
• config/system/boot
• config/system/policy
• config/system/settings
• flowinfo/flows
• stats
Changing the value of a configuration parameter
Note: The /proc/net/hp-velocity/ file is a virtual file used to configure and display the current HP Velocity
configuration in an easy-to-read format. The file cannot be modified using standard text editors.
Note: After a system restart, modifications written to the /proc interface are not retained. Original configuration
settings are restored.
1. Log in to HP ThinPro as an administrator.
2. Access the /proc/net/hp-velocity/ file to be modified.
3. Write a new line to the file in the same format as the line being modified. For example, to change the line
<parameter> = <value_1> <value_2> <value_3>, enter <parameter> = <newvalue_1>
<newvalue_2> <newvalue_3>.
4. Use the echo command and a > symbol to redirect the new value to the file. For example, echo
OperationalMode=Enabled > /proc/net/hp-velocity/config/system/settings.
5. Query the commit file to validate the uncommitted configuration changes. For example, cat
/proc/net/hp-velocity/config/commit.
6. Apply the uncommitted parameters to the system by applying on the commit file. For example, echo commit >
/proc/net/hp-velocity/config/commit.
config/about
Description
The /proc/net/hp-velocity/config/about file provides the HP Velocity version number, release number,
and product edition information; for example, Version: 3.1.0r23849 [Server].
Read / Write
•Read Only