HP Velocity - Administrator Guide

41
Administrator Guide for Thin Clients | HP Velocity
config/system/boot
Description
The /proc/net/hp-velocity/config/system/boot file specifies the following parameters (Table 21
on page 41):
• ProtectedFlows: The number of simultaneously protected flows allowed.
Note: If the default Protected Flows setting is changed, the system must be rebooted for the change to take effect.
• localSystemInformationCollection: Allow the local endpoint to send its system information and per-flow statistics to
the remote endpoint.
• remoteSystemInformationCollection: Allow the local endpoint to process and display remote endpoint system
information and per-flow statistics received.
Read / Write
• Read: Enter the following to query the configuration parameters:
cat /proc/net/hp-velocity/config/system/boot
Parameters
Table 21: /config/boot parameters
Parameter Values Default
ProtectedFlows
64 to 4096 2048
localSystemInformationCollection
•Enabled
•Disabled
Enabled
remoteSystemInformationCollection
•Enabled
•Disabled
Enabled