Troubleshooting Guide HP t520 Flexible Thin Client

Connecting the power cord
1. Plug the female end of the power cord into the power supply brick (1).
2. Connect the other end of the power cord to an electrical outlet (2).
3. Connect the round end of the power supply cord to the power supply connector on the rear of the thin
client (3).
4. Press the power cord into the retention hook (4) and bundle any excess power cord.
CAUTION: Failure to secure the power cable with the retention hook may result in the power cord becoming
disconnected, causing loss of data.
6 Chapter 2 Hardware changes