Troubleshooting Guide HP t520 Flexible Thin Client

10. Slide the new SODIMM (1) into the socket at approximately a 30° angle, and then press the SODIMM into
the socket (2) so that the latches lock it in place.
NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab
on the memory socket.
11. Replace and secure the access panel. See Removing and replacing the access panel on page 9.
12. Replace the thin client stand.
13. Reconnect the power cord and turn on the thin client.
14. Lock any security devices that were disengaged when the thin client cover or access panel was
removed.
The thin client automatically recognizes the additional memory when you turn on the thin client.
Replacing the memory module 13