Troubleshooting Guide HP t520 Flexible Thin Client

5. Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down) keys
to select the option you want, then press Enter. To return to the Computer Setup Utilities menu, press
Esc.
6. To apply and save changes, select File > Save Changes and Exit.
●
If you have made changes that you do not want applied, select Ignore Changes and Exit.
●
To reset to factory settings, select Apply Defaults and Exit. This option will restore the original
factory system defaults.
CAUTION: Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup (F10) changes
because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10
Setup screen.
Heading Table
File
Computer Setup—File on page 18
Storage
Computer Setup—Storage on page 19
Security
Computer Setup—Security on page 20
Power
Computer Setup—Power on page 21
Advanced
Computer Setup—Advanced on page 22
Computer Setup (F10) Utilities 17