Administrator Guide Windows 10 IoT Enterprise 2019 LTSC
© Copyright 2019 HP Development Company, L.P. Citrix and XenDesktop are trademarks of Citrix Systems, Inc. and/or one or more of its subsidiaries, and may be registered in the United States Patent and Trademark Office and in other countries. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. VMware, VMware Horizon, and VMware Horizon View are registered trademarks or trademarks of VMware, Inc. in the United States and/or other jurisdictions.
User input syntax key Text that you must enter into a user interface is indicated by fixed-width font.
iv User input syntax key
Table of contents 1 Getting started ............................................................................................................................................. 1 Logging on to Windows ......................................................................................................................................... 1 Finding administrative apps in Control Panel ....................................................................................................... 1 Local drives ......
HP ThinUpdate ..................................................................................................................................................... 11 HP USB Port Manager .......................................................................................................................................... 11 HP Write Manager ................................................................................................................................................
1 Getting started This guide is for administrators of HP thin clients that are based on the Windows® 10 IoT Enterprise operating system. It is assumed you are using an operating system image provided by HP and that you will log on to Windows as the admin when configuring the operating system or using administrative apps as discussed in this guide.
2 Write filter Although Unified Write Filter is still available, newer HP thin clients are protected by the write filter included with HP Write Manager. This filter is specifically designed to work with HP thin clients. To enable the HP Write Manager filter instead of the Unified Write Filter, follow these steps: 1. Double-click the notification icon. – or – In Control Panel, select HP Write Manager Configuration. 2. Select Disable write filter, then select OK. 3. Restart system. 4.
3 Configuration IMPORTANT: Be sure to disable the write filter prior to making configuration changes. Then after you have finished making changes, be sure to enable the write filter. Managing user accounts Changing a password To change the password for the currently logged-on account: 1. Select Start, and then select Settings. 2. Select Accounts. 3. Select Sign-in options. 4. Select the Change button under the Password heading, and then follow the on-screen instructions.
profile can either be local (specific to a thin client) or roaming (server-based and accessible from multiple different thin clients). NOTE: Local copies of roaming profiles should be written to the flash drive (C:), which must have sufficient free space for them to work. Roaming profiles are not retained when the system restarts. Changing the account type To change the account type between Admin and Standard User: 1. Select Start, and then select Settings. 2. Select Accounts. 3.
Installing apps To install an app: 1. Disable the write filter (requires a system restart). 2. Perform the installation. NOTE: If the installation process requires a system restart, you should perform that restart before proceeding to the next step. 3. Enable the write filter (requires a system restart). When installing apps, it might be necessary to temporarily change some environmental variables to point to the flash drive (C:) instead of the RAM drive (Z:).
Security features Availability The following table lists each feature and whether HP supports that feature on the corresponding thin client. Also, the table lists the TPM version used in each device. 6 Feature t520 t620 t628 t630 t730 mt20 mt21 mt31 mt43 mt44 TPM No 1.2 No 2.0 2.0 2.0 2.0 2.0 2.0 2.
A BIOS password can be bypassed by physically resetting the password jumper pins on the system board and clearing the CMOS. 1 2 Windows Hello Inside Passport is not supported. 3 Supported with optional HP IR Camera. Feature descriptions NOTE: Information at websites listed in this section might be available in English only.
4 Remote desktop apps Citrix Receiver Citrix® Receiver is used when Citrix Presentation Server, XenApp, or XenDesktop® is deployed with Web Interface. Citrix Receiver enables icons to be placed on the Windows desktop for the seamless integration of published apps. To open Citrix Receiver: ▲ Select Start, and then select Citrix Receiver. Enabling single sign-on for Citrix Receiver 1. Uninstall the Citrix Receiver app that is preinstalled on the thin client. 2.
remotely connect to a powerful workstation and use your graphics-intensive workstation apps wherever you go. Your apps run natively on the remote workstation and take full advantage of its graphics resources. The desktop of the remote workstation is transmitted over a standard network to your local computer using advanced image compression technology specifically designed for digital imagery, text, and high frame rate video apps. Use RGS Receiver to access the remote desktop being transmitted by RGS Sender.
5 Administrative apps NOTE: Some apps might not be preinstalled on some HP thin client image versions. If an app is not preinstalled, see Finding software downloads on page 13. HP Device Manager HP Device Manager (HPDM) provides the capability for centralized, server-based administration of HP thin clients. The client-side component is HPDM Agent. To open HPDM Agent: ▲ In Control Panel, select HPDM Agent. For more information, see the administrator guide for HP Device Manager.
HP Hotkey Support (mobile thin clients only) HP Hotkey Support enables you to customize keyboard shortcuts and enables the special function keys on the keyboard. HP Logon Manager To configure the thin client to log on to a specific user account automatically: 1. In Control Panel, select HP Logon Manager. 2. In the Windows Logon Configuration dialog box, check the Enable Autologon box, type the account credentials and domain name, and then select OK.
HP Write Manager HP Write Manager protects the contents of and decreases wear on the flash drive of a thin client by redirecting and caching writes in an overlay. HP Write manager can be opened via HP Write Manager Configuration from Control Panel. For more information, see the administrator guide for HP Write Manager.
6 Finding software downloads To find operating system images, apps, drivers, and other downloads for update or recovery, use this table. NOTE: If an item is located at http://www.hp.com/support, search for the thin client model, and then select Go in the Software, Drivers and Firmware section of the support page for that model. Item Download location BIOS images http://www.hp.com/support Hardware drivers http://www.hp.
7 Finding more information To find more information, use the following table. NOTE: Information at websites listed in this table might be available in English only. Resource Contents HP support website Administrator guides, hardware reference guides, white papers, and other documentation http://www.hp.com/support ▲ Go to http://www.hp.com/support, and follow the instructions to find your product. Then Select User Guides.
A Unified Write Filter IMPORTANT: If your thin client has HP Write Manager, see the administrator guide for HP Write Manager for instructions. This appendix applies only to thin clients that do not have HP Write Manager.
UWF management overview There are three tools you can use to manage UWF: a notification icon, a Control Panel app, and a commandline tool. Some commands can be performed using any of the tools, but other commands might be exclusive to one or two of the tools. Notification icon The UWF notification icon is located in the Windows notification area.
HP Unified Write Filter Configuration HP Unified Write Filter Configuration is a Control Panel app for managing UWF. To open this app: ▲ Double-click the notification icon. – or – In Control Panel, select HP United Write Filter Configuration.
Making permanent system configurations The following table describes the possible methods for making permanent system configurations. CAUTION: HP strongly recommends using method 1 in most situations. Method 1 Method 2 Method 3 1. Disable UWF (requires a system restart). 1. Make the necessary configurations. ▲ 2. Make the necessary configurations. 2. Commit individual cached files. The action takes effect immediately. 3. Enable UWF (requires a system restart).
Adding files and folders to the exclusion list The following table describes the possible methods for adding files and folders to the exclusion list. Method 1 Method 2 1. Open the HP Unified Write Filter Configuration app and select the File Exclusion List tab. 1. Use the command line to add an item to the exclusion list (repeat as necessary). 2. Select the Choose a folder button or the Choose a file button to add an item to the exclusion list (repeat as necessary). 2. Restart the thin client. 3.
Index A administrative apps.
