User Guide

Restore original factory defaults and settings
● If you have made changes to the printer or network settings, you can restore the printer to the original
factory settings or network settings.
● If more than two hours have passed since you rst turned on the printer and you have not set up the
printer wirelessly, place the printer in network setup mode by restoring the printer network settings. The
setup mode will last for two hours.
● You can also troubleshoot network connection issues by restoring the printer network settings.
CAUTION: If you restore the printer network settings, you will need to reconnect the printer to the
network.
To restore the printer network settings from the printer control panel
● Press (the Wireless button) and (the Cancel button) at the same time, and hold them for ve
seconds.
To restore the printer factory settings or network settings from the embedded web server (EWS)
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 80.
2. Click the Settings tab.
3. Click Restore Defaults, and select the option to restore the factory default settings or network settings.
4. Click the button on the selected page to continue.
To restore printer factory defaults from the printer control panel
● While holding (the Power button), press and hold (the Black Copy button) and (the Resume
button) at the same time, until (spinning wheel) appears on the display.
ENWW Restore original factory defaults and settings 111