User Guide
Status Description
The Wireless light is blinking, the Wireless icon is on, and the Signal
Bars icon are cycling.
The printer is in Auto-wireless connect (AWC) mode.
The Wireless light blinks for three seconds and then turns o. The wireless capability of the printer is disabled.
Change the wireless settings. For more information, see Change
wireless settings on page 77.
The Wireless light is blinking, and the Wireless icon and Wireless
Attention icon are on.
There is no wireless signal.
● Make sure your wireless router or access point is powered on.
● Move the printer closer to the wireless router.
The Wireless light is blinking, the Wireless icon is on, and the
Wireless Attention icon is blinking.
One of the following might have occurred.
● The printer has a problem connecting to the wireless network.
● An error occurs or an overlap session is detected when using
WPS.
Press (the Wireless button) and the (Information button)
together to run the wireless test, and then review the test report for
information on how to solve the problem.
The Wireless light is blinking, the Wireless icon is on, and the Signal
Bars are blinking together.
The printer is in the Wi-Fi Protected Setup (WPS) push mode.
The Wireless light is blinking, and the Wireless icon is on. The wireless capability of the printer is on, but has not been
congured.
The Wireless light is blinking, the Wireless icon is on, the Signal Bars
are cycling, and the Wireless Attention light is on.
The wireless capability of the printer is on and has been congured
before, and the printer is trying to connect to the network.
Wi-Fi Direct icon
8 Chapter 1 Get started ENWW