User Guide

Tips for print success
●
Paper loading tips
●
Printer settings tips
To print successfully, the HP printheads should be functioning properly, the ink tanks should be lled with
suicient ink, the paper should be loaded correctly, and the printer should have the appropriate settings. For
more information, see Tips for working with ink and printhead on page 66.
Print settings do not apply to copying or scanning.
Paper loading tips
● Load a stack of paper (not just one page). All of the paper in the stack should be in the same size and type
to avoid a paper jam.
● Load the paper with side to be printed on facing up.
● Ensure that paper loaded in the input tray lays at, and the edges are not bent or torn.
● Adjust the paper-width guide in the input tray to t snugly against all paper. Make sure the paper-width
guide does not bend the paper in the input tray.
For more information, see Load media on page 23.
Printer settings tips
Printer settings tips (Windows)
● To change default print settings, open the HP printer software, click Print & Scan , and then click Set
Preferences. For information how to open the printer software, see Open the HP printer software
(Windows) on page 17.
TIP: To learn more about the options in the printer driver, hover your mouse over each option to view the
tooltips.
● You can use printing shortcuts to save time setting desired printing preferences. A printing shortcut stores
the settings that are appropriate for a particular type of job, so that you can set all the options with a single
click. To use a shortcut, go to the Printing Shortcuts or Printing Shortcut tab, select the desired shortcut,
and then click OK.
To add a new printing shortcut, set the desired printing preferences on the Paper/Quality, Layout, or
Advanced tab, select the Printing Shortcuts or Printing Shortcut tab, click Save As and enter a name, and
then click OK.
To delete a printing shortcut, select it, and then click Delete.
NOTE: You cannot delete the default printing shortcuts.
● To understand paper and paper tray settings:
– Paper Size: Select the paper size you loaded in the input tray.
– Paper Source: Select the paper tray you loaded the paper into.
– Paper Type or Media: Select the paper type you are using.
34 Chapter 2 Print ENWW