User Guide

Connect your printer by using the HP Smart app
To set up using the HP Smart app
You can use the HP Smart app to set up the printer on your wireless network. The HP Smart app is supported on
iOS, Android, Windows, and Mac devices. For information about the app, see Use the HP Smart app to print, scan,
and troubleshoot on page 18.
1. Make sure your printer and device are turned on and connected to the same wireless network.
2. If more than two hours have passed since you rst turned on the printer and you have not set up the
printer wirelessly, place the printer in the network setup mode by restoring the printer network settings.
For information on how to restore the printer network settings, see
Restore original factory defaults and
settings on page 111.
3. If you are using an iOS or Android mobile device, make sure the device has Bluetooth turned on.
NOTE:
● HP Smart uses Bluetooth for printer setup only. This helps to make the setup process faster and
easier on iOS and Android mobile devices.
● Printing using Bluetooth is not supported.
4. Open the HP Smart app on your device.
5. iOS/Android: On the Home screen of HP Smart, tap (Plus icon), and then select the printer. If the printer
is not in the list, tap
Add a new printer.
Windows: On the Home screen of HP Smart, click or tap (Plus icon), and then select or add a printer.
Mac: On the Home screen of HP Smart, click (Plus icon), and then select the printer. If the printer is not
in the list, click
Printer, and select Set up a new printer.
Follow the onscreen instructions on your device to add the printer to your network.
76 Chapter 6 Connect ENWW