HP EliteBook 755 G4 Notebook PC & HP EliteBook 745 G4 Notebook PC - Maintenance and Service Guide

SSD
Description Spare part number
Solid-state drive
512 GB, HP Turbo Drive G2 TLC 914927-001
512 GB, HP Turbo Drive G2 MLC 914926-001
256 GB, HP Turbo Drive G2 TLC 914925-001
256 GB, SATA-3 self-encrypting drive Opal-2 TLC 914924-001
128 GB, SATA-3, 914923-001
Before removing the SSD, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 35).
5. Disconnect the battery (see Battery on page 40).
Remove the SSD:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the drive to the system board.
2. Remove the drive (2) by pulling it away from the connector.
NOTE: mSATA drives are designed with notches to prevent incorrect insertion.
Reverse this procedure to reassemble and install the mSATA drive.
Component replacement procedures 43