HP EliteBook 755 G4 Notebook PC & HP EliteBook 745 G4 Notebook PC - Maintenance and Service Guide

4. Insert a screwdriver or similar thin tool into the hole beside the heat sink/fan assembly, and then press
on the back of the keyboard until it disengages from the computer. Rotate the top of the keyboard
upward, and then lift the keyboard up at an angle to disengage the tabs at the bottom of the keyboard.
NOTE: Cables connect the bottom of the keyboard to the system board. Make sure not to prematurely
pull the keyboard cables out of the system board connectors.
5. Slide the keyboard slightly downward toward the palm rest to disengage the top of the keyboard from
the top cover (1). Remove the keyboard backlight cable (2), pointing stick cable (3), and keyboard cable
(4).
6. Remove the keyboard (5).
Reverse this procedure to install the keyboard.
52 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts