Maintenance and Service Guide

1. Remove the four Phillips M2.5 × 3.0 screws (1) and the four Phillips M2.5 × 12.0 screws (2) that secure
the bottom cover to the computer.
2. Along the bottom edge of the computer, insert a nonmarking, nonconductive tool between the bottom
cover and the computer
(1), and then pull the tool along the bottom to release the cover (2).
3. Remove the bottom cover from the computer (3).
To replace the bottom cover, reverse the removal procedures.
Memory modules
To remove the memory modules, use this procedure and illustration.
Table
5-2 Memory module descriptions and part numbers
Description Spare part number
8 GB, DDR4-3200 L46598-005
4 GB, DDR4-3200 L83673-005
Before removing the memory, follow these steps:
30 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts