Maintenance and Service Guide

2. Press down on the module until the side retention clips snap into place (3).
Solid-state drive
To remove the M.2 solid-state drive, use this procedure and illustration.
Table
5-3 Solid-state drive descriptions and part numbers
Description Spare part number
1 TB, PCIe, TLC L85348-005
512 GB, PCIe, TLC L85360-005
512 GB, PCIe, value L85364-005
512 GB, PCIe + 32 GB Optane memory L85366-005
256 GB, PCIe, TLC L85350-005
256 GB, PCIe, value L85354-005
256 GB, PCIe + 16 GB Optane memory L85356-005
128 GB, PCIe M06792-005
Solid-state drive protective shielding M13006-001
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 29).
2. Remove the bottom cover (Bottom cover on page 29).
3. Disconnect the battery cable from the system board (see Battery on page 37).
Remove the solid-state drive:
32 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts