Maintenance and Service Guide

2. Remove the touchpad bracket from the computer (3).
3. Disconnect the cable from the ZIF connector on the touchpad (1).
4. Remove the rubber piece that sits over the screw on the right side of the touchpad (2).
5. Lift the at keyboard cable and protective shielding from the top of the touchpad to access the screws
underneath (3).
6. Remove the four Phillips M2.0 × 2.0 screws (4) that secure the touchpad to the computer.
7. Remove the touchpad from the computer (5).
46 Chapter 6 Removal and replacement procedures for authorized service provider parts